Gender
Male
About
Location
Andhra pradesh
About Me:
Am a professional cinematographer turned to be a Drone maker to make an aerial machine to get perfect shots... still learning through work.
Please tell us a bit about your UAV interest
the Game changing ability of the UAVs with its unique flight controllers made flying much easier with advanced features
Hometown:
Visakhapatnam
Activity Feed
"Thanks Andre K,
Even the motors are getting hot with Tattu 2700Mah 3S1P 25C Lipo Pack and my earlier flight with Turnigy 5000mAh 3S 25C Lipo Pack is too bad it just lifts a foot height and land.
So should I change my Battery with a higher C rating…"
Even the motors are getting hot with Tattu 2700Mah 3S1P 25C Lipo Pack and my earlier flight with Turnigy 5000mAh 3S 25C Lipo Pack is too bad it just lifts a foot height and land.
So should I change my Battery with a higher C rating…"
My APM 2.6 enters failsafe_battery and Lands after few minutes. I am almost near to my dream to make an Aerial rig and this is stopping me. I am attaching my last Data Log. Any support is appreciated.this is my Quadcopter SpecificationsFrame…
"Hi, I have tried the steps you have mentioned but still no improvement, Air radio is not responding and always blinking red and green. what is it indicating ?here is the video link"
Recently I added 3-axis Good Luck Buy storm 32Bit gimbal (220 grams) and Xiaomi yi action cam (70 grams) to my APM 2.6 Q450 Quadcopter with 2700Mah 3S Lipo and started Auto tuning in AltHold mode, after few minutes in the tuning process the…
Is my Air telemetry burned ?? Please Help Me !!!Symptoms:1) Air radio blinking red and green continously2) Able to connect, Upgrade Firmware, load settings using FTDI3) Not communicating with Ground module with same settings and firmwareyou can see…
"follow this link for better guidance https://www.youtube.com/watch?v=JIgs3UCLfd0 but use my neo6mgps.txt, if you are using UBLOX NEO-6M GPS "
"Even i too suffered it and made my GPS blink back, initially I updated my GPS with 3DR-Ublox.txt from www.copter.ardupilot.com through APM2.6 and u-center_v8.17and this doesnt works for Ublox NEO-6m. Now I uploaded the right file and it is blinking…"
"I think even my air radio is Burnt it is blinking red and green continously..
How did you confirm that your air radio is burnt ?"
How did you confirm that your air radio is burnt ?"
"Lucky!!! made my GPS blinking back, initially I updated my GPS with 3DR-Ublox.txt from www.copter.ardupilot.com through APM2.6 and u-center_v8.17and this doesnt works for Ublox NEO-6m. Now I uploaded the right file and it is blinking blue. The right…"
"No improvement, the air radio lights keep blinking red and green, even my gps is not blinking blue but it is able to get 3d fix and Apm is able to arm. A friend of mine told to "Re flash separately and confirm channel numbers and check for breaks in…"
After trying to upgrade the firmware on my Air Radio it stopped connecting to the Ground module and both the green and red LEDs keep blinking.On studying the setup I found:1) The air module is able to load settings individually when connected to…
"Nice Setup, what is the flight time ?"
"Thanks !! Jun Yamog the Video was spectacular, but there is a little wobble, is that due to the gimbal ? and can you post the pics of your Setup."
Hi guys, Pls suggest some best and budget 3 axis and 2 axis Gimbals for Xiaomi Yi action cam (Chinese Gopro) for my APM 2.6, F450 clone Quadrocopter.
