Gender
Male
About
Location
Braunschweig
Please tell us a bit about your UAV interest
Octo-Plattform for some GoPro-Videos
Activity Feed
Ok, I got my brand new pixhawk today and this is really annoying... The device won't boot up, I got the well known "compass not calibrated" entry in my logfile. There were many people out there having quite the same problem, but 95% of them used the…
Hey,today I noticed an old problem, which was already reported by other members in 2012. When doing a yaw (speed about 90° per second) for about 2s (so 180° turn), the copter ist really stable in its height for the first 90°, but then (slowly or…
"I just wanted to give an update about my problems with autotune I had 4 months ago (which unfortunately crashed my octo). The advice was I had a problem with my (SimonK) ESCs and you were correct!
During the winter-time I ordered some new ESCs and…"
During the winter-time I ordered some new ESCs and…"
"Autotune crashed my Octocopter!
I flew between 4-6m, engaged autotune and everything worked as it should. When doing the roll stabilization, there was one maneuvre which let my copter roll way too much, drop to only 0.5m above ground when it luckily…"
I flew between 4-6m, engaged autotune and everything worked as it should. When doing the roll stabilization, there was one maneuvre which let my copter roll way too much, drop to only 0.5m above ground when it luckily…"
"I think I found the reason. There is something wrong with the batteries. I use 2x 5000maH 3S 25C batteries on my Octo. Today I found out (with two different packs), that at 11.1V (with my DX8 Telemetry) the Copter had no more power to climb and some…"
Hi there,I'm building up an Octocopter (4kg with Battery) and till now everything was very successfull (PID tuning etc.). A few days ago I changed to the new firmware 3.01 (and to my new radio, from Spektrum DX6i to DX8) and the problems began.When…
