Gender
Male
About
Location
Canberra
About Me:
Robotics & computer vision Driver assistance systems Mobile sensing in dynamic environments
Please tell us a bit about your UAV interest
Skywalker 1900 (full UAV, APM, RFD900, OpenLRS 433M, VTx 2.4G) Falcon wing (full UAV, low power cons., long range) Tigermoth 400 (test platform! lots of glue!) Boomerang (oldschool)
Hometown:
Canberra
Activity Feed
"PS - I get Link stats of 100% in mission planner at 19200 (and 9XR display works). I was only getting 64% at 57600, but data throughput was much greater (~3x datarate, less ~60% dropout = better data throughput, and it showed in Mission Planner),…"
"PLEASE NOTE - REPLACE "57600" with "19200" in my post above to get operational! OOPS!!"
"OK, I just tried setting all baud rates to 19200 (rather than 57600), and of course it works now. Except mode display seems to display wrong mode.
I misinterpreted this README text:
Configure your TX via CLI (done in the same fashion as with…"
I misinterpreted this README text:
Configure your TX via CLI (done in the same fashion as with…"
"Update to this guide:
It presently seems much better to use the Gitsly branch of OpenLRSng on your RX/Tx modules. Get the latest Arduino code here: https://github.com/gitsly/openLRSng . Thanks to Martin for maintaining that code. I get about double…"
It presently seems much better to use the Gitsly branch of OpenLRSng on your RX/Tx modules. Get the latest Arduino code here: https://github.com/gitsly/openLRSng . Thanks to Martin for maintaining that code. I get about double…"
"Edit: Thanks Martin! - I have updated to your current code, and the serial bridge seems to work well (No 9XR display due to OpenTX's outdated GCS_Mavlink lib, I believe).
- I agree it's at least twice as fast data bandwidth as Kha's main trunk, at…"
- I agree it's at least twice as fast data bandwidth as Kha's main trunk, at…"
"I first tried OpenTX with MAVLINK extenstion provided as binary (rev 2940) using latest Companion9x (Ver 1.52, rev 2381). Next I tried the OpenTX master branch from source ("current - rev 2834 - 2013-10-29"). Neither worked.I have not tried the…"
"Hi Martin,
Thanks for your work on your Gitsly branch of OpenLRSng. It really speeds up data transfer between my APM ArduPlane 2.78b and Mission Planner (57600 baud). I use OrangeRX modules in a 9XR. Great!
The problem is that I just updated to…"
Thanks for your work on your Gitsly branch of OpenLRSng. It really speeds up data transfer between my APM ArduPlane 2.78b and Mission Planner (57600 baud). I use OrangeRX modules in a 9XR. Great!
The problem is that I just updated to…"
"Has anyone successfully arranged a voluntary RMA and had their APM 2.5 repaired? Or has it been standard that the request is ignored?"
"I have replied to this RMA 4 times, the first on 4th June. All my emails have been ignored. Is that happening to anyone else?
I am especially annoyed by the delay, because I noticed this issue well before the RMA was announced. I use airspeed…"
I am especially annoyed by the delay, because I noticed this issue well before the RMA was announced. I use airspeed…"
