About Me:
Senior in Electrical Engineering program
About
Please tell us a bit about your UAV interest
Getting this thing to fly is project
Activity Feed
Hi,I am not sure what the actual title of these parts are, but i need replacements for the aluminum conical parts that hold the propeller onto the axle of the motor. I have the previous version of Arducopter (4 arm). I am not sure where to find…
"Chris: Update, The issue is certainly with my board. I borrowed a friend's APM/oilpan and have had no issues with getting code to upload to it with both Arduino and mission planner (though mission planner is asking for flight gear version 2.5…"
"Chris: APM2560, I did do the soldering (I have checked for stray solder for possible shorts). From memory, a red and yellow(mux) light are on on the red APM board--let me double check the lights and confirm tomorrow (quad and parts are now in…"
"Chris: btw, there is no telemetry for my quad--it's eventually supposed to autofly to waypoints using only gps. I will need to be able to upload modified code; I do have a magnetometer. Thanks again"
"Chris: Thanks; Yes, I have tried to upload the regular code with the Mission Planner. The Com port shows up in mission planner. After choosing Quad plane, the mission planner attempts to detect apm and cannot. This is why I tried uploading with…"
"Hi, I am having the same issue as Jason, I am wondering if and how it was resolved? I've gone through the debugging and also re-flowed my solder.... Went as far as trying to reburn the bootloader following: …"
