Does anybody have good configurating file to M8N. And may be somebody have a good tutorial, or can explain , how to load configuration file into u-center, to do some changes and save it again. Or easier way to create that file from zero.
Hello, I have a problem with my roll in my Pixhawk on my drone. Picture show what happen. This is was done when drone stay completely still. Only launch it and wait when this happen to record clear log.
There is some weird behavior of horizont on my Pixhawk. From some time, it started loose his horizont. Some times restarting of pix helped, some times after restarting it stay in position around 45 to real horizont. Just to clarify, I have done
Hello everybody, need help with. I have pixhawk with kit 433mhz 3DR telemetry. After my attempts to change TX Power from 11(default) to max. 20. I have weird problem with connection. Now behavior is follow: timeout goes from 28 to around 20 sec and t
Need a help. Problem is follow: when I connecting my four servos and esc with motor directly to receiver, everything work. Than I try to re-connect, servos go to outputs 1,2,4 and esc with motor to 3. Receiver connects to Pixhawk through ppm enc
Have my Pixhawk with ArduPlane and gps neo-n8m. After every start Pixhawk logs his trajectory to card in .bin format. try something to change in mission planner but it still logs in bin. Can I somehow configure Pixhawk save also u-blox format (
Have my Pixhawk with ArduPlane and gps neo-n8m. After every start Pixhawk logs his trajectory to card in .bin format. try something to change in mission planner but it still logs in bin. Can I somehow configure Pixhawk save also u-blox format (
Hello guys, I received my Pixhawk. But have a problem with instaling of firmware(Adruplane 3.2.3) using Mission Planner(1.3.19) I have the PixHawk connected via the USB cable. It seems to work. Follow all instruction, but all times , I dont hear any
Hello, today i was really happy when I receive my Pixhawk. But have a problem with installing of firmware(Adruplane 3.2.3) using Mission Planner(1.3.19) I have the PixHawk connected via the USB cable. It seems to work. Follow all instruction, but all