Gender
Male
About
Location
Detroit Lakes, MN
Please tell us a bit about your UAV interest
Hexacopter and Pixhawk
Hometown:
Detroit Lakes, MN
Activity Feed
I am wondering what I should set the low voltage alarm to. The battery is 4S LiHV with total voltage of 15.2, should I use the standard 3.3V for the alarm?
"I am building a hexacopter and using the Pixhawk as an autopilot. I am running through the calibrations and have completed the compass and radio calibrations. Only issue is with the 3d accelerometer calibration. I have the pixhawk level and all of…"
I am building a hexacopter and using the Pixhawk as an autopilot. I am running through the calibrations and have completed the compass and radio calibrations. Only issue is with the 3d accelerometer calibration. I have the pixhawk level and all of…
"I am also having this same issue. I am using the same APM Planner 2.0 on a Mac, and the pixhawk has the Hexa firmware. I was told to try this with the airplane firmware and then reflash with the hexa firmware. While on the airplane firmware it did…"
I am trying to setup my pixhawk through the APM 2.0.20 GCS on a Macbook Pro. I cannot get passed the accelerometer calibration as it only displays "Time Remaining Until Timeout: " and it does not ask me to flip the pixhawk in any axis, nor does it…
