Gender
Male
About
Location
West Hollywood, CA
About Me:
I have fun.
Please tell us a bit about your UAV interest
Started with RC stuff when I was a kid, got back into it with the Phantom v1. Since then I've built a couple of my own and I have a 3dr iris on it's way to me.
Hometown:
Los Angeles
Activity Feed
"Without the gimbal and without fpv gear. Just a gopro on the front with the waterproof shell on. Which, btw, is causing 'center of gravity problems' that result in bad altitude hold in Loiter and Alt hold, making it impossible to fpv anyway. "
"Well you guested I had a camera on the front so, I'm hoping you're right.
Please let me know if you find out more.
Thank you!"
Please let me know if you find out more.
Thank you!"
"The zippy 5000mah is a little tight and a little heavy, but it works and gives decent times. Granted you have to install your own xt60's, but you can also buy 3 for the price of the Thunderpower."
"I just added a small carbon fiber tail with old motor mount and the screw that hold the top shell onIMAG0987.jpgIMAG0988.jpg"
"Someone needs to model and 3d print a new battery door with a holder for an FPV transmitter. Anyone?"
"Not sure about the weight, but I've been right around 15 minutes with a gopro. They're only $20 bucks now at HobbyKing
http://www.hobbyking.com/hobbyking/store/__8579__zippy_flightmax_50..."
http://www.hobbyking.com/hobbyking/store/__8579__zippy_flightmax_50..."
"Just FYI, I got 16 minutes in the air with my gopro, on the zippy 3s 5000mah. I think it's only $50 bucks."
"I received the arm but not the black plastic case that holds the actual gopro as pictured on the 3DR Iris web page. am I missing something?"
"I've been trying to find where to get the black gopro mount pictured in most of 3dr's photography. I thought it would come with the Iris but apparently not. The standard case the gopro comes with doesn't allow for access to fpv port on the side. …"
