Hi,
today I actualized my version of MP on the PC.
Then I found that the FULL PARAMETER LIST is gone.
The FULL PARAMETER TREE is also not visible in the menue.
Is it just me or is the MP version 1.3.44 just without this option?
Greetings
Read more…Hi,
during the COMPASS_MOT calibration I burned the wires with the DF13 plugs from the PM to the Pixhawk.
I'm lost because it is the second time this happened with two different FC on the copter.
I'm using 6S Lipo and a PM that reads DC in 2S - 7S - 5.4
Read more…hi,
trying to setup a new copter with Pixhawk FC and mission planner I realized that the option *DISARM_DELAY* is not available ??????
The 3 or 4 seconds idling after arming and after landing are way to short...... in my opinion.
Will it come back later
Read more…Hi,
happy New Year , one and all :) !
now upgraded from 3DR APM2.5 to a PixHawk FC.
Have 3D (GPS) lock.
The compass calibration is the same as with the ol'good APM, the difference is I see two coordinates rotating and taking the points.
The values obtaine
Read more…Hi,
suddenly I got a *not responding* error with the effect with the screen whitens and MP freezes.
After reinstalling several times the Mission Planner, it still happens.
Then I restored the whole PC to a earlier point and reinstalled MP again. Still h
Read more…Hi,
out of sheer curiosity I'm often changing the flight modes.
Now I'm wondering what is the difference between LOITER and POSITION_HOLD modes?
Is there an advantage from one over the other?
Both work well holding the copter firmly in the air.
Am I missi
Read more…Hello :) ,
is it possible to update this GPS from 3DR Robotics through the APM 2.5 to newer firmware ?
I expect to have more SAT's 3D fixed after that. Will this work?
I suppose I will have access to GLONASS / Galileo SAT's after the update, right or wr
Read more…Hi,
after a crash (beginner) I fixed a few broken things.
I also flash the APM 2.5 new because I changed too much parameters.
All mandatory things and settings and calibration done.
Now, during my first test flights I observe a strange behavior.
The Copte
Read more…Hi,
trying to see what the feature Auto Analisis shows me after a flight I get this error messages:
and when I click OK, this:
Can somebody tell me what I'm doing wrong ??
(BTW I tried .log and also .bin files)
Thanks in advance! :)
Read more…Hi,
trying my first flights I always ended in trees or wheat fields.
(Copter recovered every time)
Some times it flew good and respond well, even to my RTL test.
But suddenly during my "lessons" there where some flyaway attempts (had to shut down and do
Read more…Hi,
I'm wondering where I can buy a spare cable with mini JST SH 1.0mm 6 pin female to female ?
It is the cable w. 6 wires that connects, for example, the old GPS style socket from the 3DR APM 2.5 board to the Ublox Lea GPS (six wires) and I found it
Read more…Hi,
I have the problem mentioned in the title.
When arming, all the motors spin up to high rpm immediately with no response to the position of the throttle lever.
After setting the value (mot-spin-armed) to zero, the motors does not spin anymore when ar
Read more…Hi , :D
this question was posted a few days ago and I have an aditional concern about the GPS matter.
I updatet the APM 2.5 to Arducopter v.2.8.1 hexa with the GPS connected. Would this erase the data from the GPS too ???????
3DR ublox lea6 GPS:
after tr
Hi ,
this is a question regarding the 3DR ublox lea6 GPS:
after trying out several things with no success I hope for help from this honorable forum and the experienced members.
About 11 weeks ago I purchased the APM 2.5 FC board and the GPS brand new an
Hi,
this is a question regarding the battery installed on the 3drobotics GPS board:
Recent purchased, the GPS make a fix to the sat's in 10 to 30 seconds.
Now, the board was not used for a while and after hours connected via USB there is still no fix.
I
Read more…Hi,
just read over your info, that an injection mold for the plastic case for the new APM board is ready.
I have a suggestion: Could you think about to offer these (protective) cases not only in black but also in a transparent option?
I like the color a
Read more…Hi,
my name is Bernardo, I'm located since 4 years in Germany. After a long time of reading about multicopter and comparing different brands and options I decided that the flight control and the electronics should be the ArduPilot Mega v. 2.5.
The desi
Read more…