Gender
Male
About
Location
South Australia
About Me:
I am a viticultural agronomist working out of McLaren Vale in the south of australia.
Please tell us a bit about your UAV interest
I have a Flip fpv Frame with Ardupilot
Hometown:
McLaren Vale
Activity Feed
"It's a DJ's flame wheel copy frame that's a 600mm, I should have known it was going to flex, it's my own fault,
I've just purchased a legitimate dji 450mm flame wheel frame so that should help with no flex"
I've just purchased a legitimate dji 450mm flame wheel frame so that should help with no flex"
"3.2.1 hey?
I'll give that a go today and see if there is any difference thanks,
If there is any problems again I'll upload the logs to have a look at
They arms are very flexible which is obviously not good I think I need to get a new frame"
I'll give that a go today and see if there is any difference thanks,
If there is any problems again I'll upload the logs to have a look at
They arms are very flexible which is obviously not good I think I need to get a new frame"
This is the third quad I have scratch built with the apm board,I am very familiar with how this board works and what is needed to help make this a perfect machine,But this newest copter I am building is being nothing but trouble,It still has compass…
Does anyone know why i would be having this problem?these escs and motors are brand new out the packet,when i throttle up quickly 2 out of the 4 esc's die and reset on meis there any way how to remedy this?
"i just done my compassmot and only getting readings of around 7% do you think this could be the reason i get changed in altitude when on a waypoint mission?"
"no one? my crops are going to start to be eaten by birds soon :("
"around this area on this flight were some powerlines, i dont know if these could cause some electromagnetic interference or something maybe?"
"and more, thank you2014-11-21 13-41-26.log2014-11-21 13-37-55.log"
"here are some of the test flights over the orchard
please could someone more clever than me review and tell me what im doing wrong, thanks2014-11-21 14-11-54.log2014-11-21 13-57-46.log2014-11-21 13-49-25.log"
please could someone more clever than me review and tell me what im doing wrong, thanks2014-11-21 14-11-54.log2014-11-21 13-57-46.log2014-11-21 13-49-25.log"
"nothing?"
hello all i have a HKPilot Mega V2.5 setup with an external compas mounted away from everything like you should. it has the latest 3.1.5 version of arducopter.when i set up a waypoint mission today, i would set it to fly about 30 waypoints in a…
i am just wondering if it is possible to use auto tune with my turnigy 9x?i cant seem to change the PWM for channel 7 with it?can anyone please point me in the right direction?
"here is a video of whats happening"
"no one knows anything about this??"
probably a simple and obvious question but I am getting occelations when i have the settings up too high and its way too sluggish down low, and there is no in between, im thinking that my motors are too low kv and my copter is too heavy?does this…
