Gender
Male
About
Location
Gatineau, Quebec
About Me:
Love technology and rc stuff.
Please tell us a bit about your UAV interest
Been flying remote copters for years and starting with drones. Got a DJI F450 with KK2, Fat Shark FVP and OSD. I would like to plan missions over our properties with live video and recording.
Hometown:
Gatineau
Activity Feed
"A little FPV with 3.0.1, works really well with my F450. This is a raw video taken from a key chain camera velcroed to the bottom of the quad.
- very hot morning (thermals)
- start with a 360 in loiter, stabilize flying, RTL at the end.…"
- very hot morning (thermals)
- start with a 360 in loiter, stabilize flying, RTL at the end.…"
"WOW! I used to have to spend hours playing with PIDs. With this release I'm using the default PIDs and it's never been that good! I tested stabilize, alt-hold, RTL, missions, circle, flying in loiter... all in windy cinditions! The quad is super…"
"Default PIDs and Setting...
I have a suggestion for documentation and for the first post of a new release like when R3 will become an official release. It would be nice to have a print screen of the "default" PIDs and access to a param file. That…"
I have a suggestion for documentation and for the first post of a new release like when R3 will become an official release. It would be nice to have a print screen of the "default" PIDs and access to a param file. That…"
"Looking for the log_bitmask parm in MP.
I'm setting up another PC and I can't remember how to generate the list of parameter in Mission Planner... I'm missing the log bitmask (log_bitmask) parm in the "Advanced Params" screen...
Bruno"
I'm setting up another PC and I can't remember how to generate the list of parameter in Mission Planner... I'm missing the log bitmask (log_bitmask) parm in the "Advanced Params" screen...
Bruno"
Is simple mode working in acro? I can use simple mode in alt hold and stab all day but when I switch to acro it stays in normal mode. I searched in the wiki and on the forum and I don't find any indication that simple mode is not supported in acro.…
"I found the problem.... It's so simple... My home PC is Windows French and the decimal has to be a comma not a dot... When I used the comma, the value stayed.
Bruno"
Bruno"
"I tried different ways to enter the value but I still don't know how... Someone must know..."
I can enter an number ex -13.34 but I don't know how to "save" it. I don't see a "write" button...
"Hi Tony,
In the "Standard Params" near the bottom of the list, it's called "Telemetry startup delay (TELEM_DELAY).
Bruno"
In the "Standard Params" near the bottom of the list, it's called "Telemetry startup delay (TELEM_DELAY).
Bruno"
I'm using MP 1.2.50 mav 1.0. I can not save the declination value and I don't see the effect after doing the dance? What am I doing wrong? Bruno
I don't understand the cable to connect the GPS module that came my kit... the red wire connects to the ground... photo.JPG Did I get the wrong wire?
"I just received my APM 2.5 and 3DR radio and I'm having the same error...In MP 1.2.5 mav 1.0, in "Configuration/3DR radio", I can "load the settings" and I get data for the "Local" and the "Remote" but can not connect. I'm selecting the right port…"
I've been reading this forum for over 1 month regarding APM2.5. I want to upgrade my dji f450 stock/KK2. I use the quad for FPV and video and I need alt.hold/RTL and loiter. The more I read this forum (fly away, power shutoff,...) to more my head…
"Hi,
I will follow your post... I have the same DJI f450 and I want to fly missions so I'm also looking at the APM 2.5. I've been reading this forum for days and watching too many videos and I'm still not convinced (always some issues).
Bruno"
I will follow your post... I have the same DJI f450 and I want to fly missions so I'm also looking at the APM 2.5. I've been reading this forum for days and watching too many videos and I'm still not convinced (always some issues).
Bruno"
