Gender
Male
About
Location
San Francisco, CA
About Me:
Co-founder of Fighting Walrus, maker of iDroneLink Lead of evaForge Team developing entry into DARPA uavForge challenge
Please tell us a bit about your UAV interest
Interested in VTOL type applications and aerial photography Anything to do with iOS
Hometown:
San Francisco
Activity Feed
"Link isn't working for me, I get a 404 error"
Latest update of iDroneCtrl ground station fixes a small bug affecting some of our users, where iDroneCtrl would repeatedly request the mission. Using the Fighting Walrus Apple MFi approved iDroneLink™ lightning accessory you can control your…
"As of the 1.4.0 release iPhone mission planning is now supported"
"@UAS_Pilot less than 100yds is very confusing, we routinely test at up to 1/2 range. We do see drops occasionally at shorter ranges, but it is usually due to the antenna shadowing as previously mentioned. "
"So I looked at the Butterfly Bridge by Monarch, and it isn't something we could add on just the software side. The BB uses BlueTooth 2.X which Apple restricts connecting to unless the hardware (BB) is a MFi device. We would have to make a MFi…"
"Joe we have tested at 1/2 ranges and beyond without issue, but we have seen issues with antenna shadowing on the early IRIS and custom copters where the drone body/battery blocks the RF signal significantly reducing the range. What drone are you…"
"Gary thanks for catching the typo, it should be corrected now."
Latest update of iDroneCtrl ground station for iPhone and iPad, adds iPhone Mission Planning. Along with our Apple MFi approved iDroneLink™ lightning accessory you can control your personal drone from your iPhone or iPad over the same long range…
"Klaus you should have received a shipping notification of your replacement unit today, but can you capture the settings data from your windows groundstation. The settings should match the settings below with the exception of the netID which should…"
"We are showing that unit passed factory test and connected with our test drone. We can ship you another unit, but in the meantime can you connect with the drone using a windows or mac groundstation and confirm the radio settings are the default?…"
"@Klaus
I sent you an email as well, but can you go into the "Settings" app then General->About and then scroll down to iDroneLink and click on it. You should see detailed information about your unit like this:
This will give me additional…"
I sent you an email as well, but can you go into the "Settings" app then General->About and then scroll down to iDroneLink and click on it. You should see detailed information about your unit like this:
This will give me additional…"
"@MarkThe 433Mhz version is in stock and currently shipping (4/28/15)."
"@Klaus The most common issue is not having the iDroneLink on the same netID as your drone. You can see instructions on how to change the netID here:http://fightingwalrus.com/pages/idronelink-radio-configuration-with... drones ship with a…"
Do you live in Europe or a country where 433 MHz is the operating frequency for your personal drone? If so you may be interested to know...We are pleased to announce that the 433 MHz version of iDroneLink™ is now shipping. This lighting accessory…
"3/24/15 ROI is being worked on now. Supporting the Parrot (AR.Drone 2.0, and Bebop) drones is what we are working on now. Follow Me is our next big feature focus."
"We (Fighting Walrus) do have an iOS solution for iPhone and iPad. The app is iDroneCtrl with the corresponding hardware iDroneLink. The solution is compatible with the IRIS right out of the box."
