About Me:
SpatialGuru\ Beginner of UAV\ IT guru
About
Please tell us a bit about your UAV interest
Create an amazing video, orthomap, dtm, dem, termain model, model of heritage building is my interest to learning UAV :)
Activity Feed
I just upgrade my quadcopter to AC-3.1 yesterday. All tunes were done. It's quite stable flight, but sometime in stable mode the elevation of the copter was decrease 1-2 meter suddenly and return to stable. During the flight, I did switch to…
"Very nice!"
I'm wondering how the arducopter can flight for over 30 mins! My one can flight for 10 mins only and would like to design a arducopter which can flight more than 15mins. As below is my arducopter setup: Mode: HexaMotor distance: 550mmMotor kv:…
"Thanks a lot for your explanation.
Eventually I got the answer! Did you try to simulate the disaster? Can the X2 or H able to recover in this situation? Actually I want to build a more reliable drones! :) "
Eventually I got the answer! Did you try to simulate the disaster? Can the X2 or H able to recover in this situation? Actually I want to build a more reliable drones! :) "
"Very good thread!! Thanks Forrest.
I would like to ask which design to be provided a reliable flight if there is any one/ two props was fail during flight. I like the design of X2 and H!
"
I would like to ask which design to be provided a reliable flight if there is any one/ two props was fail during flight. I like the design of X2 and H!
"
I would like to ask, anyone tried to use some material for covering the ESC's electric cable to control the compassmot results? What material are you using? Thanks :)
Today I tried to fly my copter in the area where is nearest the two high buildings. I found that the copter is flight not very stable (in loiter) compare with the open space. Would like to ask how to prevent this and how can I determine the…
I would like to setup a GCS with my Nexus 4 or 7 via bluetooth or USB adapter. Which USB adapter should I buy if using USB connection with 3D radio? Thanks a lot.Eric
I want to ask what is your setting of using CHDK? What setting did you use for taking a vertical static images? eg ISO, shutter speed... etc. I using quadcopter apm 2.5.I taken some picture, but it was blur.
"It seems that many people ar using Turnigy Plush 30A ESC! Does it need to be customized/ programming? Or just do the throttle adjustment? Where to find the Multicopter ESC?"
I was informed that the Hz of ESC will affect the performance of the multicopter, but I cannot find it form the ESC's specification.
Dear All,I found no Y6 configuration of Mission Planner 1.2.25! Which one I should select for my Y6 frame? Thanks. Eric
"Sure! it can if you install the CHDK as well!"
"Here may the best choice for using in UAV!
http://www.maxmax.com/canon_sx230.htm"
http://www.maxmax.com/canon_sx230.htm"
"Now the GPS can be recognized. Originally the GPS's speed 9600 of GPS 6M cannot be recognized by the ArduCopter 2.7.1!
Config.h
# define CONFIG_APM_HARDWARE APM_HARDWARE_APM1 update to
# define CONFIG_APM_HARDWARE APM_HARDWARE_APM2
Add the below…"
Config.h
# define CONFIG_APM_HARDWARE APM_HARDWARE_APM1 update to
# define CONFIG_APM_HARDWARE APM_HARDWARE_APM2
Add the below…"
