Gender
Male
About
Location
Paris
About Me:
French 48yrs Newbie in UAV QuadCopter Spyder4 DJI Wookong M/OSD MK2 T-Motor MN3508 700kv / ESC 45a Pro 450Hz Tarot IronMan650 PixHawk Arducopter 3.2 T-Motor MT4006 740kv / ESC Castle QuadPack 35
Please tell us a bit about your UAV interest
Investing on Industrial Solutions Thermo, Photogrammetry
Hometown:
Indonesia
Activity Feed
"Hi Phil,
I'm using Pixhawk since about 4 years now. I'd be happy to have a better understanding about what you looking for.
Cheers"
I'm using Pixhawk since about 4 years now. I'd be happy to have a better understanding about what you looking for.
Cheers"
Dear all,I'm facing an issue and wondering why my Battery (6s 12000mAh) supposed to provide a 35mn flight time just gives 20mn (Out of Battery)... Then, Check voltage after landing... 23.24v (50%).Details:C Rating is:10Battery Voltage to failsafe…
"Hi Bernardo
Your int compass is probably damaged
I exactly had the same issue with 2 differents Pixhawk whom experiment by misfortune few crash. Even by disabling the Internal, still had Error Pos Vert Variance and Error Compass Variance (Full Red…"
Your int compass is probably damaged
I exactly had the same issue with 2 differents Pixhawk whom experiment by misfortune few crash. Even by disabling the Internal, still had Error Pos Vert Variance and Error Compass Variance (Full Red…"
"Hi Ivan,
Very nice and impressive, l'm interested about the frame.
how about the weight of the frame (without electronics)
Thank you"
Very nice and impressive, l'm interested about the frame.
how about the weight of the frame (without electronics)
Thank you"
Dear,Following a crash, I look forward for Spare Parts for my iFlight G40 Brushless Gimbal or any other that i could adapt. If anyone could advise where l could order spare parts gimbal frame parts to build my own will be really appreciated.Thanks…
Dear all,We actually working on a mapping project, but after an unsuccessfull week of working we experimenting Yaw Drifting when Alexmos (SBGC) Gimbal Controller is connected to Pixhawk through Serial.We'd really appreciated if any could advise how…
"Thanks Todd for your answer
Actually spent a week working on Alexmos full calibration (6 pos) + Temp, and connected to Pixhawk through Serial 4/5 but still slightly drifting and not respecting Pixhawk's azimuth. I finally removed my Yaw motor (lol) "
Actually spent a week working on Alexmos full calibration (6 pos) + Temp, and connected to Pixhawk through Serial 4/5 but still slightly drifting and not respecting Pixhawk's azimuth. I finally removed my Yaw motor (lol) "
"My main purpose was to counteract azimuth drift for phtogrametry (Photoscan Pro)
But unfortunately the only things tested so far are:
- RC > Pixhawk: Roll/Pitch/Yaw via Serial SBGC = OK
- Follow Yaw = KO
- In Mission Planner/Optional Hardware: No…"
But unfortunately the only things tested so far are:
- RC > Pixhawk: Roll/Pitch/Yaw via Serial SBGC = OK
- Follow Yaw = KO
- In Mission Planner/Optional Hardware: No…"
"Hi,
Thank you for your post;
I'm an Alexmos beginner and after a week working to avoid sensor yaw/azimuth drift by using SBGC Serial API 2nd Serial... :-(
Setup:
- Ardupilot ver. 3.3.3 rc2
- Mission Planner ver. 1.3.35
- Gimbal 3 axis iFlight…"
Thank you for your post;
I'm an Alexmos beginner and after a week working to avoid sensor yaw/azimuth drift by using SBGC Serial API 2nd Serial... :-(
Setup:
- Ardupilot ver. 3.3.3 rc2
- Mission Planner ver. 1.3.35
- Gimbal 3 axis iFlight…"
"Hi Rory,
Thank you very much for your Post
I'm actually facing an azimuth drift issue with my Alexmos 32bits
I was wondering SBGC Serial API 2nd UART could solve this
I'm using Pixhawk arducopter 3.3.3 rc2
thank you
Claude"
Thank you very much for your Post
I'm actually facing an azimuth drift issue with my Alexmos 32bits
I was wondering SBGC Serial API 2nd UART could solve this
I'm using Pixhawk arducopter 3.3.3 rc2
thank you
Claude"
"Hi all,
Problem solved
My SD Card was (Apparently) corrupted...
Just Format the SD Card then now all seems ok and normal"
Problem solved
My SD Card was (Apparently) corrupted...
Just Format the SD Card then now all seems ok and normal"
Hi All,Weird status with my Pixhawk running Arducopter V.3.3.2Had regular Green Main Led as Normal since l experimented flight planSince that moment, main led is solid blue or Red sounds like Armed with no GPS lock even with GPS: 3DR Fix and 16…
Dear All,Just setup a Tarot 680 Pro all calibrated, armed properly all motors spins and seems working perfectly but... It doesn't takeoff. It looks like thrust stucked at 25% (stabilize, althold or loiter...) no reaction pass over and no react to…
"Hi Jacques
I will advise you to pay attention at Polarity with MinimOSD (l Already lost one...)
Then also pay attention to properly init OSD to powered it after Pixhawk
Have this Diagram since a year l guess found on Internet Forum
Cheers"
I will advise you to pay attention at Polarity with MinimOSD (l Already lost one...)
Then also pay attention to properly init OSD to powered it after Pixhawk
Have this Diagram since a year l guess found on Internet Forum
Cheers"
"Hi Michael,
I do confirm my Copters are 3.2.1 for both
Regard"
I do confirm my Copters are 3.2.1 for both
Regard"
"Hi Michael
Thank you so much for this information.
Although so far was compliant to download logs cause it works fine with my other Tarot 680
Would you mind tell me which ver. does support DF over MavLink
Thank you in Advance
Respectfully
Claude "
Thank you so much for this information.
Although so far was compliant to download logs cause it works fine with my other Tarot 680
Would you mind tell me which ver. does support DF over MavLink
Thank you in Advance
Respectfully
Claude "
