About

Gender

Male


Location

Sydenham Ontario


About Me:

Rc hobbieist, tattooist and computer tech


Please tell us a bit about your UAV interest

everything :) flightstick arduino interface


Activity Feed

Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"I dont use mavlink data feature since I dumped my 3dr controller ,and haven't got a pixhawk or newer one yet
OlliW would know that answer for you http://www.rcgroups.com/forums/showthread.php?t=2055844"
Jan 28, 2016
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"Latest Update
added rc overlay for manual control 
link to apk
overlay button after clicking menus show rc overlay

after clicking overlay icon

you can drag the overlay around if you grab a non control area of it"
Nov 15, 2015
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"Another Update
Android app update 0.0.9CHANGELOG:1. Redesigned internal screen/cards operations, got rid of using android fragments, nothing visual but simplified code a lot and should improve stability on orientation changes and app relaunch also…"
Nov 9, 2015
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"Another Update
one more android app update for today, 0.0.8CHANGELOG:1. Added status update only if it is different or voltage is different more than 0.02v2. Changed state colors to be distinct3. On orientation change view should stay on the same…"
Nov 3, 2015
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"New release update 
Android app release 0.0.7CHANGELOG:1. Added status polling2. Added heartbeat dot to indicate activity, will change color according to state colors3. Fixed Level and Restart commands will not cause disconnect/reconnect to the…"
Nov 3, 2015
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"New release update 
Android app release 0.0.6CHANGELOG:1. Added swipe left/right to change tab2. Added card zoom in (by default all values are read only, except for enable/disable all motors), in zoomed card it will allow to change values*See…"
Nov 2, 2015
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
""
Oct 31, 2015
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"Oct 31st 2015 File Here for the android app
Release 0.0.5 of android controllerChangelog:1. Redesigned read/write buffer usage using ByteBuffer (should bump buffer usage performance)2. Fixed Save, enable/disable motors should work nowRC Commands…"
Oct 31, 2015
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"New Android Tuning App by XOR.IO @ RCGroups
Latest File Here

A few screenshots on my 36"TV using my S805 Media Box"
Oct 30, 2015
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"The page Randy linked to says:
Note:
Support for this gimbal is included in Copter 3.3 (and higher) for gimbals running v067e (or higher).


I don't have a pixhawk or apm platform at this time to do further testing"
Oct 11, 2015
Charles lakins replied to Kai's discussion Ardupilot (Legacy) code? in ArduPilot (legacy) User Group
"theres also another version here in a lower post
http://diydrones.com/group/ardupilot-legacy-user-group/forum/topics..."
Jul 26, 2015
Charles lakins replied to Kai's discussion Ardupilot (Legacy) code? in ArduPilot (legacy) User Group
"changed to a dropbox link above that should work ok"
Jul 26, 2015
Charles lakins replied to Kai's discussion Ardupilot (Legacy) code? in ArduPilot (legacy) User Group
"dunno if this helps but you will need arduino ide to configure & upload
ardupilot 2.7 - Also includes imu v2 code
been so long.. I cant help further tho

Dropbox link to file: https://www.dropbox.com/s/ebc0kc6zyl2reii/Ardupilot-Legacy.rar?dl=0"
Jul 26, 2015
Charles lakins commented on Charles lakins's blog post Storm32 BGC gimbal
"Olliw would have a better answer to that question, As I don't have a pixhawk to do further tests as things move on
another person you could ask is digaus on rcg too http://www.rcgroups.com/forums/showthread.php?t=2423260, hes well versed in…"
Jul 22, 2015
Charles lakins left a comment on ArduPilot (legacy) User Group
"I think thats what hes looking for
they are great you can use the open headtracker code on them too if I remember right
http://www.rcgroups.com/forums/showthread.php?t=1677559"
Jul 10, 2015
Charles lakins left a comment on ArduPilot (legacy) User Group
"the imu v2 flat is hard to find anymore if thats what hes asking"
Jul 10, 2015
More…