Gender
Male
About
Location
Natick, MA
About Me:
Mechanical engineer with interests in FPV UAVs, cars, aquariums, flashlights, robotics
Please tell us a bit about your UAV interest
Just starting out!! Looking to receive input on my first build. Eventually plan to contribute to the knowledge base that is this forum!
Hometown:
Natick
Activity Feed
"Two more notes that might help Kevin figure out his issues.
1. Make sure you have a functional installation of Gstreamer on your RPi. I uninstalled all of mine, and reinstalled from the link on RoboGoby's blog.
2. Look into the configuration…"
1. Make sure you have a functional installation of Gstreamer on your RPi. I uninstalled all of mine, and reinstalled from the link on RoboGoby's blog.
2. Look into the configuration…"
"ok got it working... something about the settings RoboGoby used for his submersible sub worked for me. http://robogoby.blogspot.com/2014/01/raspi-camera-gstreamer-10-w-wi..."
"just tried an older version of 32 bit gstreamer, i.e. 1.2.2... still no dice"
"Also, the windows machine and raspberry pi 2 can ping one another successfully..."
"Patrick,
Tried on a new windows machine. Same problem, the pop up window will not show. It just sits on "New clock: GstSystemClock"
Tried your pipeline setup and it made no difference. I opened up port 9000 for inbound and outbound, didn't help…"
Tried on a new windows machine. Same problem, the pop up window will not show. It just sits on "New clock: GstSystemClock"
Tried your pipeline setup and it made no difference. I opened up port 9000 for inbound and outbound, didn't help…"
"I am routed through an ethernet switch, could that be why? Both receiving and transmitting ends are on the same switch."
"Patrick,
Really impressed with all the work you have done! What a great contribution to the hobby! Thank you!
Now on to my problems: I have set up gstreamer to stream from a networked Raspberry Pi 2 with Pi Cam. I am using an i7 machine on the…"
Really impressed with all the work you have done! What a great contribution to the hobby! Thank you!
Now on to my problems: I have set up gstreamer to stream from a networked Raspberry Pi 2 with Pi Cam. I am using an i7 machine on the…"
"Thanks for the response! I am still trying to get used to this blog/forum interface that's you have going on here.
I thought the MultiWii setup had a proven backbone in the FPV copter world, and is designed to work with all the sensors I listed…"
I thought the MultiWii setup had a proven backbone in the FPV copter world, and is designed to work with all the sensors I listed…"
Hi there everyone! Fresh meat here looking for some feedback!I would like to start a quadcopter build in the hopes of having a stable FPV platform down the road. Unfortunately, I am no expert, and really have no idea if what I am planning on…
