"So I Tried starting with just the radio plugged in and no osd.  The radio had the solid green light on but would not connect to MP. I then tried only the osd plugged in and it worked and show the relevant items on the screen.  So knowing that the…"

"is there something I need to do to enable the apm to send the telemetry data.  The radios solid green light come on and the both connect under the sik radio tab, but mission planner won't connect to the apm through the radios."

"Also both radios show up properly in the mission planner sik radio page. They are both configured the same and have the same net Id."

"I've plugged the radio into the telemetry port and I've plugged the osd into the uart0 port. But neither radio or the osd work. The radio shows a solid green light when on and the radio plugged into the computer show solid green as well. The radios…"

"I purchased one of the APM Mini pro's.  I am trying to connect the osd and sik radio to it but based on the images I've seen, it seems there is a discrepancy about where you connect the OSD,  I've seen it being shown connected to the UART0 port and…"

"It looks like that wiki page only applies to pixhawk and px4. I have a apm 2.5. I don't think some of those parameters or tabs are on the apm 3.2.1"

"Is there anyway that you could be more specific about how to do what your suggesting? I'm kind of new to all this and just trying to figure things out. Thanks"

"Could you clarify which setup screen you referring to in mission planner ?  or where the setup screen your referring to is located.   Thanks for responding"

"Has anyone experienced this problem or know of a solution to it."

"This APM 2.5 and power module are being used in a Diatone White sheep frame, along with 3DR 850 motors and 3DR ESC's.  The version of Mission Planner I'm using is 1.3.31  "

"anybody have any ideas about this problem?"