Gender
Male
About
Location
Vienna
About Me:
IT Networking and Security Specialist working for big telecommunication company.
Please tell us a bit about your UAV interest
coming from KK to KKPlus, moved to MultiWii and now interested in ArduPirates. Also have done some Mikrokopter-stuff. Flying everything from fixed wing to Tri, Quad, love FPV
Hometown:
Vienna
Activity Feed
"I am somehow confused when it comes to the magfield influence by the electrical components as such.
I have several copters and when looking to one (warthox-frame) which has excellent loiter the graph shows quite clearly that the throttle has impact…"
I have several copters and when looking to one (warthox-frame) which has excellent loiter the graph shows quite clearly that the throttle has impact…"
"maybe a stupid question, but is there a way to configure the throttle stick less sensitive? what i am looking for is a way to adjust and hold altitude in a better way. once reaching the point where my copter hovers, a small little change on the…"
"I love the fence feature. Really makes fun to limit the area for flying.
That would be even more fun, if AC would support a minimum alt as well.
Based on that teaching other to fly copters could be much more safe.
Moreover, what if instead of auto…"
That would be even more fun, if AC would support a minimum alt as well.
Based on that teaching other to fly copters could be much more safe.
Moreover, what if instead of auto…"
"exactly that's the case with certain Windows 7 versions.
I also had exactly the same issue on my PC.
this helped me out: http://www.fontsupply.com/fonts/A/Arialn.html
br from vienna,
christian"
I also had exactly the same issue on my PC.
this helped me out: http://www.fontsupply.com/fonts/A/Arialn.html
br from vienna,
christian"
"thank you so much for your guide.
it helped me a lot to get my copters much more stable than I ever thought they might get.
however, i still experience some little problem i could not get rid of so far:
when being in loiter or alt-hold mode and…"
it helped me a lot to get my copters much more stable than I ever thought they might get.
however, i still experience some little problem i could not get rid of so far:
when being in loiter or alt-hold mode and…"
"I received my JD-IOBoard v1.1 today, cabled everything and things look somehow basically OK, but I did not figure out, how to configure/use JD-IOBoard with a X-frame type quadcopter properly.
The drawing in the Configurator shows for both front…"
The drawing in the Configurator shows for both front…"
"hey, that's good to know, since I am thinking of upgrading from my Easystar I to the II and I like the camera pod.
did you additionally adapt somehow the front of the pod to get a tight fit?
thanks a lot,
christian"
did you additionally adapt somehow the front of the pod to get a tight fit?
thanks a lot,
christian"
"is there already a plan, when JD-IO-Board Mavlink-Frsky conversion will include Voltage/Current from APM-Sensors (e.g. AttoPilot)?
I saw that current version has prepared some code fragments, but they are commented out, since they seem not to be…"
I saw that current version has prepared some code fragments, but they are commented out, since they seem not to be…"
"hmmm, I don't have any screen recorder running, but it seems from what I read on some articles and posts, that HIL simulation parameters (gains) vary between computers, so there might be a high impact on the performance of the system, meaning I…"
"hi there!
I am trying to get HIL Simulation for Quadcopter working on my APM 2.5 with MissionPlanner 1.2.28 and x-plane 9.7
I have loaded the QRO_X from the starter package and it basically flies, but I am struggling quite heavy with PID and…"
I am trying to get HIL Simulation for Quadcopter working on my APM 2.5 with MissionPlanner 1.2.28 and x-plane 9.7
I have loaded the QRO_X from the starter package and it basically flies, but I am struggling quite heavy with PID and…"
"@Jani: Thanks for the information.
However, I got it working without having to share Rx among several devices by following an advice from
http://code.google.com/p/minimosd-extra/wiki/APM
SR0_EXT_STAT,2
SR0_EXTRA1,5
SR0_EXTRA2,5
SR0_EXTRA3,3…"
However, I got it working without having to share Rx among several devices by following an advice from
http://code.google.com/p/minimosd-extra/wiki/APM
SR0_EXT_STAT,2
SR0_EXTRA1,5
SR0_EXTRA2,5
SR0_EXTRA3,3…"
"got it! in case others have the same problem like me: check the following
http://code.google.com/p/minimosd-extra/wiki/APM"
http://code.google.com/p/minimosd-extra/wiki/APM"
"in addition to what I am asking in my prior comment I found at http://code.google.com/p/arducam-osd/wiki/Troubleshooting
which is most likely the reason for the problem:
---------------------------------
Data is showing up only when MinimOSD's TX is…"
which is most likely the reason for the problem:
---------------------------------
Data is showing up only when MinimOSD's TX is…"
"Hi!
I am using JD-IOBoard for Frsky Telemetry and I am a bit confused, if Rx should be shared with Telemetry, JD-IO and OSD? In fact my understanding was that OSD and JD-IO only require Tx (and +5V and GND of course).
However, when having only Tx…"
I am using JD-IOBoard for Frsky Telemetry and I am a bit confused, if Rx should be shared with Telemetry, JD-IO and OSD? In fact my understanding was that OSD and JD-IO only require Tx (and +5V and GND of course).
However, when having only Tx…"
"depending on the sensors you have it will show you
Temp (from the baro)
Altitude
Voltage (requires sensor)
GPS coordinates
if you do not require the LED control function of the JD-IO board, a simple arduino pro mini also does the job btw... :-) "
Temp (from the baro)
Altitude
Voltage (requires sensor)
GPS coordinates
if you do not require the LED control function of the JD-IO board, a simple arduino pro mini also does the job btw... :-) "
Hi there!I am currently using the rainy days to setup my APM2.5. Now, I got a Mediatek MTK3329 GPS from flytron.com quite some while ago (used it with MultiWii via I2C at that time).this GPS also provides serial interface and since I switched over…
