Cabling for FPV
I have this
http://www.getfpv.com/lumenier-ce-720-effio-v-720tvl-super-wdr-camera.html
and this
The cables that came with them a
Read more…I have this
http://www.getfpv.com/lumenier-ce-720-effio-v-720tvl-super-wdr-camera.html
and this
The cables that came with them a
Read more…I attempted a mission.
Arduplane is set to continue on tranmitter failsafe. After takeoff I turned off the transmitter. I had a telemetry connection. I have flown many flights in the hard config of this plane so i am very positive that the video is no
Read more…Hi,
I am planning a mission. The landing point is not the same location as the takeoff point.
Hello,
does a 1.3 ghz hd transmitter reciever combination exist that is suitable for an rc plane. I have a standard 1.3 ghz setup but i would love better video quality coming back to a screen.
Read more…i am going to setup auto-takeoff for the first time. I dont know the location. can i just setup any mission at any location on mission planner with the first point being auto take off and then use that mission ?
from reading the documentaion the plane
Read more…Hello,
i have my av out from my receiver plugged into the AV IN/OUT of the fatshark dominator HD and have the receiver turned off. I am still not getting an image. Is there something else i need to do ?
I have referenced this but there is little/no inf
Read more…hello,
i find it tough enough to take off my finwing penguin. Its balanced and i takeoff in manual. usually i'm on my own and if there is someone to help then they have 0 experience.
I dont really want to use the auto take off feature.
What i currently
Read more…I have just setup a new quadcopter using the Tarot Iron Man 650 Carbon Fiber Quadcopter Frame. I have also added a gimbal.
The quadcopter howers at a PWM of about 750. This is the max recommended per the arducopter instructions. I set the THR_Mid opti
Read more…Hello,
I am looking for a sturdy digital camera mount for a quadcopter that doesnt have a gimbal. I just want to lock it at 30 degrees pointing down. Simple. The quadcopter i have is this.Ideally if it fits onto this, that would be great.
Something lik
Read more…Hi,
Does anyone know if this works or if there is newer firmware. From reading the comments there are issues ?
https://www.youtube.com/watch?v=7Nqr4-cbyvI
Read more…Hi,
Does anyone know of a good youtube video that explains how to bind an X8r to a taranis and connect to an APM 2.6 via Cppm.
What i have tried is binding the X8r in D16 mode and jumpering channel signals 2 and 3 on the apm but it doesnt work.
maybe i
Read more…Is it possible to disarm the arduplane after it has landed using the transmitter only?
The reason i would find this useful is , i usually land into long grass about 100 metres from where i took off and what i find is that while walking to the plane it
Read more…hello,
I have an Arducopter and an Arduplane and would like to build an Ardurover using an existing APM 2.6.
What is the largest frame for an Ardurover i can buy ?
Does ardurover support 4 wheel drive ?
I want something i can send back very rough ground
Read more…I want to buy a spare finwing penguin in europe but i have seen no website that has them in stock. Does anyone know wher these can be purchased?
Read more…I have put together a long range capable finwing penguin with 2 x 5000 mah batteries + ezuhf video equipment. I have to get a friend to hand launch it but its quite difficult to get right. I would say it takes 3 attempts to get it launched. Given tha
Read more…Hi,
Attached is a dataflash log from my APM 2.6 running the latest firmware. I flew for ~ 12 minutes but most of the data is missing ?
See the image below and the log is attached.
All my logs have missing data.
thanks
Damien
Read more…It would appear that the largest purpose built widescreen FPV monitor is 10.1". When i say purpose built i mean it does not have the "blue screen" issue. I watched a video on youtube where the author stated that if you put a DVR inline with your vide
Read more…With JP1 removed, is it ok to power my finwing 390 pan tilt servos from the oututs of the APM on channels 6 and 7?
thanks
Damo
Read more…