"Thanks Chris, I see you're referring to gimbal lock with that configuration. Maybe I'll have to test it on my own. I would bet it works fine, however the benefits will only support specific cameras."

"Kyu, no your design is prefect the way it is. I'm referring to using flat cameras or board-like cameras. But I've never seen roll first brushless gimbals. So I was wondering if anyone tried it or if there are reasons to avoid it."

"Nice and clean 3D print. Love it. The motor mounts are nice and clean as well. Going to post specs?
So question since you build gimbals, has anyone ever built a roll first gimbal? Every gimbal is tilt, roll, then pan. The only exception are servo…"

"Is the code compatible with a Flying Wing type aircraft? Everyone has been using the standard fixed-wing. So is it possible to use the code with Elevons?"

"Good to know, I don't have tricopter experience. I know he likes to use airplane type motors, so the disc motors should be a great efficiency boost. I'm still skeptical on the weight of only 0.9kg."

"I can't help but be skeptical of the 35min flight time. At 0.9kg with only 3 motors, it is definitely possible. However a GoPro and gimbal is around 200g minimum, so I'm sure 0.9kg without it. David Windestål's tricopter is extremely minimal and…"

"Way to go on keeping civil. I'm glad the charges were against the shooter, its just a matter of time before the officials knock on his door for the cash. I can't believe people's ignorant and alarmist life styles. "

"It looks like they used those 10c Multistar batteries.... maybe they were pushing over 10c lifting asparagus."

"Agreed, however 13 stops isn't as much as you may think. You need something more like the Red Dragon's 20 stops. Besides you will require grading the shots in DaVinci or Adobe Raw. It isn't plug in play. I know first hand."

"Renaud: Their website says 1080p ProResHQ is 18.4MB/s (big M & B). So the BMPCC 220mbps ~ 27MB/s

They are always changing the compressing settings, so it probably isn't a bad thing. 65MB/s for compressed raw is probably amazing. I use the BMCC EF…"

"The Voyager in the shots were clearly tracked in. So walkera couldn't risk shooting the video with the actor, or is it just vaporware?"

"Evgeniy, I agree the 2804 isn't strong. However with the Alexmos controller I was able to get it to work fairly well with a 3-axis GoPro setup. The settings were high (like 150 power out of 250), which made it hot and very torquey. There aren't make…"

"I love it, being a gimbal designer myself. The way you have it open up is really well thought out. I'm a little surprised you used the 2804 on the yaw, it is a bit underpowered if you have wind resistance. I'm also surprised you didn't use all…"