About

Gender

Male


Location

Terrebonne (Québec)


About Me:

What can I say about myself ?!? I'm 61, recently retired and I just LOVE this new UAV thing. I just might plan on making a small business ut of this (if all goes well).


Please tell us a bit about your UAV interest

I started less than a year ago, by purchasing a DJI Phantom (1), and dressed it all up, so much that it had no more room inside its shell (not hard!). Then migrated all the equipment to a DJI Flame Wheel F450. Not much of luck there either! It barely could elevate 5 feet in the air, so it was heavy!! Well, I can't blame this on the F450. With a Zenmuse H3-2D, GoPro Camera, two Video Transmitters (one for the Video Link, the other one for the Fat Shark Camera on 2 Servos), Ground Station Data Link, Can Hub, and a few 3S LiPO batteries, no wonder!! I am now re-migrating / rebuilding all this into the next step up the scale, a Flame Wheel F550, always from DJI. It should lift this time! Hehehe! I plan on finishing this before long, and I came to your site after reading a bit on the inventor of AeroSIM RC, Manuel Guillén.


Hometown:

Terrebonne, Québec (Canada)


Activity Feed

Daniel Lachance posted discussions
Jul 15, 2014
Daniel Lachance left a comment for Jeff Jackson
"Hi Jeff!
Jeff Jackson ... Infinite Jib ... This IS a small world!  Hahaha!
You will probably remember me if I tell you that I am the customer that drove from Montréal all the way to your place, one Friday afternoon, to get that AeroSIM-RC Software.…"
Jul 15, 2014
Daniel Lachance replied to Andy Hornsey's discussion Possible Bug? Compass Calibration Failing on Mission Planned
"Hi Quadz!  Sorry for the delay!  I was a little tied up ...in my USB extension cord ... while performing the « Calibration Dance »! ;-)
I am a bit green in this business, so allow me to ask you how to get the version of that Firmware, and I'll be…"
Jul 13, 2014
Daniel Lachance replied to Andy Hornsey's discussion Possible Bug? Compass Calibration Failing on Mission Planned
"Hey Quadz' ... and all the others which operations were delayed by this minor ... Bug.
Like Richard said, I just got it from the « Help » menu then, at the bottom of the screen, select « Upgrade » and ... Voila!  You've just upgraded to 1.3.7, built…"
Jul 13, 2014
Daniel Lachance replied to Andy Hornsey's discussion Possible Bug? Compass Calibration Failing on Mission Planned
"Hi Andy!
As you can see, you're not alone having this problem.  I'm in the same boat as most of you.  And since it was my first experience on the APM platform, I looked on my end over and over again, making the Calibration Dance in my solarium,…"
Jul 12, 2014
Daniel Lachance replied to Daniel Lachance's discussion DJI vs ... What to do? ...What to do ?
"Thank you for your concern, Paul.  Sorry for the delay in the reply.  I was pretty busy the last few days!  Also, please apologies for the lengthily reply!  I am a ratchet jaw!  Hehehe!
I was not familiar with the Scan Eagle, so I took a walk on…"
Jun 29, 2014
Daniel Lachance replied to Daniel Lachance's discussion DJI vs ... What to do? ...What to do ?
"Hi Robert!
Sorry for the delay on the reply, but I've been very busy lately.
Don't get me wrong, Robert.  I never said there was no flyaways with DJI, nor any other company's controllers.  Shit happens, and there are more flyaways that involves DJI…"
Jun 29, 2014
Daniel Lachance posted a photo
This picture was taken with my DJI Phantom 1 on October 13rd on 2013. It was taken at an altitude of 1500 feet and, as you can see, the weather was very nice, allowing super clear picture.This area is in Terrebonne, in Québec, Canada.
Jun 25, 2014
Daniel Lachance replied to Daniel Lachance's discussion DJI vs ... What to do? ...What to do ?
"Hey Swift!
Thanks for writing in!  Pixhawk Controller is sure nice.  I am not quite sure it is fit for my needs just yet.  I am rebuilding my late Phantom 1 into a Flame Wheel F550 at the present time and, like I said before, I would like to give…"
Jun 25, 2014
Daniel Lachance replied to Daniel Lachance's discussion DJI vs ... What to do? ...What to do ?
"Hi Chris!
Thank you for taking the time to reply to me and my concerns about DJI and its weird behaviours from time to time.
Replacing the « Fisher Price look alike » transmitter and receiver was the very first thing I did on my Phantom 1.  I…"
Jun 25, 2014
Daniel Lachance replied to Daniel Lachance's discussion DJI vs ... What to do? ...What to do ?
"Thank you Austin!  Yes, your message found me all right!  Hehe!
When I told the Controller / Women similarity joke to my wife, she threw me a dirty look!  I'm not sure why ... !o!
I'll sure investigate all the avenues prior to purchase another brand…"
Jun 25, 2014
Daniel Lachance replied to Daniel Lachance's discussion DJI vs ... What to do? ...What to do ?
"Hi Gary!
Thanks for the reply.
I was (and still am) using 9 inch Carbon Fiber Props (see picture below).  As for more « pull », I decided to stay with the DJI platform, since I'm very satisfied with it, and opt in for the Flame Wheel F550.  I am…"
Jun 25, 2014
Daniel Lachance replied to Michael Ciurescu's discussion DIY cheap landing gear
"Hi Michael!

Isn't that Gear a bit heavy for the F550?  Mine is loaded with all kinds of modules, i.e. Fat Shark, 2 cams Ground Station Module, Can Hub, ... On top of that, I have an H3-2D Gimbal underneath this platform...
But all in all, I like…"
Jun 25, 2014
Daniel Lachance replied to Daniel Lachance's discussion DJI vs ... What to do? ...What to do ?
"Wow!  Makes me think!  Hehehe!
I purchased a « 1Si » Micro Quadcopter, from Heli Max (see included pictures), complete with a micro camera and I think I'll get it out of its box before doing anything else.  And I'll get some practice.  I think it…"
Jun 25, 2014
Daniel Lachance replied to Daniel Lachance's discussion DJI vs ... What to do? ...What to do ?
"Thank you John.
Just today, I went to purchase a piece of UltraWire at my local Hobby Shop, and asked about all the controversy on DJI's Naza Controllers.  The owner of the place sels all kind of controllers so, he could tell me about the pros and…"
Jun 25, 2014
Daniel Lachance replied to Daniel Lachance's discussion DJI vs ... What to do? ...What to do ?
"Hi Michael!

I sure won't miss the opportunity to pay you a visit if I pass by Toronto, that is a certainty, my friend!

Best regards,
Daniel."
Jun 25, 2014
More…