Gender
Male
About
Location
Fleet, Hampshire
Please tell us a bit about your UAV interest
Arducopter, building my first quad with APM2.5+. Q650 frame (X650 Clone), Tiger Motor 2216's, Turnigy Blue Series 30A ESCs, RCTimer Brushless Gimbal, Martinez Controller.
Hometown:
Fleet, Hampshire, UK
Activity Feed
"Had this configured for some time and worked well. But recently fitted a 6-position switch in place of P2. Got that all working but is there any way to have the selected flight modes shown when using a true 6-position switch like this?"
"1.2.55 doesn't appear to be noticeably slower in drawing the page on my laptop?
The modes is at Hardware > Mandatory Hardware > Flight modes
HTH"
The modes is at Hardware > Mandatory Hardware > Flight modes
HTH"
"First post so be gentle ;)
I've been flying with v2.9 for a while now and after reading the thread here on the progress that has been made in v3.0 I decided to take the plunge and install rc5.
All good so far, I've followed the guides and watched…"
I've been flying with v2.9 for a while now and after reading the thread here on the progress that has been made in v3.0 I decided to take the plunge and install rc5.
All good so far, I've followed the guides and watched…"
