Gender
Male
About
Location
Waterloo, Ontario
About Me:
Love learning robotics and especially UAVs!
Please tell us a bit about your UAV interest
Love the hobby and excited about what the future holds for this field. I also hold the proper ground pilot credentials for commercial SFOC exemption in Canada.
Hometown:
Waterloo
Activity Feed
"Some of the FatShark FPV systems have a slot for SD cards. Never used it myself yet.
This one has a SD card slot and is a very decent entry level system (I have one myself).
http://therobotsource.com/fat-shark-fpv-systems-drones-robots/584-f..."
This one has a SD card slot and is a very decent entry level system (I have one myself).
http://therobotsource.com/fat-shark-fpv-systems-drones-robots/584-f..."
"A GoPro is too expensive to strap to a FPV racer. A Mobius is a far better solution and they are only around a 100 bucks....."
"You can count me in!! I have even started a page called the FPVracershub.com"
"Hi Garvarma, Sorry for the delay. I did watch the video. Here are my thoughts:
There are two separate calibrations that need to be done with the ESC, the first is the programming with a programming card. Then there is a second calibration that…"
There are two separate calibrations that need to be done with the ESC, the first is the programming with a programming card. Then there is a second calibration that…"
"Hi Garvarma, It may be that your radio needs a slight adjustment and is not arming which is probably the reason why the motors are not moving. To trim your throttle stick, go to the SETTINGS and scroll done to DISPLAY. Once in DISPLAY highlight…"
"Maiden Flight!! (manual flying)"
"Mission Planner Motor Test"
"Step 11: How to Calibrate the ESCs to Go Live With The Pixhawk Flig..."
"Step 10 Setting Up the Telemetry Radios for the Mission Planner Gro..."
"Step 9 Setting Up and Configuring the Mission Planner Ground Station"
Trying to get this figured out....if anyone knows the fix it would be appreciated.ESC's are calibrated and also calibrated with Pixhawk.RC is calibrated in Mission Planner BUT during the Pre-Arm check I get the message that RC IS NOT CALIBRATED and…
I am stumped. Mission Planner was working fine and now it will no longer save the radio calibration. On the Pre-Arm check it says R/C Not Calibrated although the calibration has been completed. It seems as though the values of the calibration are…
"Here is the associated webpage!"
