Gender
Male
About
About Me:
Started building Quadcoppter in dec 2012. The first Q was a DJI 450 with NAZA. In june 2013 I started building a TBS Discovery with arduflyer and gps. Flying missions looks me great.
Please tell us a bit about your UAV interest
At this moment things are possible I dreamt about in my young years. Flying combined with filming and making missions.
Hometown:
Munstergeleen
Activity Feed
"Thanks for the answers, but I don't see anythink I do wrong.
I can fly the quad but is not so solid as my NAZA copters. The APM is flying with movements up and down. Tried several settings, is always be able to fly, but I miss a straight movement.…"
I can fly the quad but is not so solid as my NAZA copters. The APM is flying with movements up and down. Tried several settings, is always be able to fly, but I miss a straight movement.…"
"My apm flies rather well (f450 frame). Is doing the missions as porogrammed. But I do not succeed doing the autotune.
I do not seeing the copter movements. I do not see changing the settings.
When I start autotune I get a message, but never get a…"
I do not seeing the copter movements. I do not see changing the settings.
When I start autotune I get a message, but never get a…"
"Just flew my first mission whitout any problem. Started in alt-hold, switched to loiter and than auto.
I am not happy with the behavior in loiter. During flight the quad goes up and down, shakes and does not react solid on wind and stick.
can…"
I am not happy with the behavior in loiter. During flight the quad goes up and down, shakes and does not react solid on wind and stick.
can…"
"I am new with the apm. A Mountainings to discover and to adjust. My goal is flying missions, I have experience with the NAZA but do miss flying missions with this controller.
My experience till now.
The FC, telemetrie, cables, all has good solid…"
My experience till now.
The FC, telemetrie, cables, all has good solid…"
"Everyone is looking for the right settings. Please add your settings if the gimbal is working well. My gimbal is shaking a little and drifts during flight.
kindly regards
Dick Gerritsen
dutch mountains"
kindly regards
Dick Gerritsen
dutch mountains"
"I have a 6 channal remote (mx 12 graupner), all channals are in use, now i need a channal for the gimbal. I have the idea of using an additional remote with 2 channals. Anybody an idea which remote I can use? Maybe other hints?"
"Gimbal up side down? Thinking about using a GLB gimbal in my TBS Discovery up side down, place enough. Has anybody any experience with an upside down gimbal from GLB?"
"Comment above: I have a dji 450."
"I want to mount this gimbal below the baseplate. Have to drill 4 holes in the bottom (45x45).
Does anabidy where the leads are? Can I drill without getting problems?
Dick Gerritsen
the Netherlands"
Does anabidy where the leads are? Can I drill without getting problems?
Dick Gerritsen
the Netherlands"
"Anyone using this gimbal with the sony as10/as15? If yes please some pics and advise?"
"A Question about planning a mission.
Is it possible planning a mission on a why the turns are smooth, At this moment it is for me only possible the quadcopter stops at a wp, makes a turn and flies to the next wp.
gr.
Dick Gerritsen
Dutch…"
Is it possible planning a mission on a why the turns are smooth, At this moment it is for me only possible the quadcopter stops at a wp, makes a turn and flies to the next wp.
gr.
Dick Gerritsen
Dutch…"
"Some finetuning gavegood result:
Firmware 3.1rc2
Frame TBS Discovery
Props 10 inch
esc 30 A
Motors 1000kV
2200mAh, flighttime 8 minutes
Battery 3s
finetuning:
Wpnav_speed 850
wpnav loid speed 850
wpnav accel 150
ahrs_rp_p 0,2
Wp radius 300 cm…"
Firmware 3.1rc2
Frame TBS Discovery
Props 10 inch
esc 30 A
Motors 1000kV
2200mAh, flighttime 8 minutes
Battery 3s
finetuning:
Wpnav_speed 850
wpnav loid speed 850
wpnav accel 150
ahrs_rp_p 0,2
Wp radius 300 cm…"
"Stefan, thanks for your reply. I did change the loiter speed and auto speed from 500 to 750 cm/s. It was better, but it seems the pitch is to small as I want. I mean the nose must be more down like in stabilze mode, the angle must be more.
please…"
please…"
"Some results of a test flight.
Firmware 3.1rc2
Frame TBS Discover
Motors 1000 kv, ESC 30A
weather: less wind
standard settings, only loiter p =0,5
frame: V
Stabilize mode: good reaction. Flies well.
loiter mode: slowly reaction of the sticks, at…"
Firmware 3.1rc2
Frame TBS Discover
Motors 1000 kv, ESC 30A
weather: less wind
standard settings, only loiter p =0,5
frame: V
Stabilize mode: good reaction. Flies well.
loiter mode: slowly reaction of the sticks, at…"
"Hello evrybody, I am Dick Gerritsen from the Netherlands and new here. I started building and flying quadcopters in december last year. I am very satisfied with my DJI 450 with NAZA. Now I am building a TBS with arduflyer and gps. The main reason…"
