About

Gender

Male


Activity Feed

Dimitris posted a discussion
I just put together a new camera quad. It's the 3DR DIY frame with a Pixhawk running 3.5.2 and Ublox M8N GPS.I have rock solid GPS reception (# of sats and low HDOP), calibrated magnetometers (two of them) and hovers at exactly half throttle when in…
Aug 29, 2017
Dimitris replied to Jamie's discussion FMA Sensor Cable
"Get the connector from an old PC. It's the cable that used to connect the CD-ROM drives' analog sound output to the soundcards."
May 19, 2009
Dimitris commented on Chris Anderson's blog post Canadian police testing Dragan X6 multirotor
"I wouldn't call a system that can be used at least in EU, Canada and Australia exactly "restricted"!"
Mar 12, 2009
Dimitris commented on jlcortex's blog post Bidirectional RC transmitter with ARM7, Xbee PRO, Bluetooth and a PDA (2)
"Sweet!

Keep us informed.

Dimitris"
Mar 12, 2009
Dimitris replied to Graham Dyer's discussion ArduPilot not working
"I think that a RC car has a very tight turning radius, essentially turning around in a small diameter's circle, and thus GPS cannot pick up the speed vector effectively enough.

Dimitris"
Mar 12, 2009
Dimitris commented on Chris Anderson's blog post Using ArduPilot 2.x in the field
"Are these features already included in code 2.0? Are there some sentences that need to be uncommented in order to activate them?

Dimitris"
Mar 11, 2009
Dimitris commented on Chris Anderson's blog post Using ArduPilot 2.x in the field
"Do we get fly-by-wire functionality (Co-pilot stabilization) when the ArduPilot is on manual mode (MUX off)?"
Mar 11, 2009
Dimitris replied to 13brv3's discussion Plane doesn't turn when engaged?
"Chris,

I tested the Ardupilot with the latest code in RTL walking around with the airplane in my hands and the rudder was all over the place - definately not turning me toward the lauch point. Ok, I said, obviously the rudder is reversed.
I go back…"
Mar 10, 2009
Dimitris posted a discussion
I would like to upgrade to the latest GPS fixing code. Is there a step by step guide?Thank you,Dimitris
Mar 3, 2009