Gender
Male
About
Location
Pompignan 30 / Gard
About Me:
Car RC at the begenning , and later on Helis , now on ( trying :) ) Multirotor , actually learning on a DIY 450mm Diatone Frame , with KK2.1.5 controler , not be able to fly yet, just hover and learning how to 3DFly :)
Please tell us a bit about your UAV interest
Searching Information , tutorials , and creating contacts for future outgoing with my futur craft :)
Hometown:
South of France
Activity Feed
"[SOLVED] Today is the day I solved this issue .I follow your advise Michael , and upgrade to the 3.2.1 FW , I wish I won't have GPS issue with this FW as I had ... I just kept all parameters from previous Compass / Radio / FS / Switches setup and…"
"I just forget one detail , I tried 3.2.1 , but had too much problems with all GPS guided operations . And decided to downgrade to the last FW the Quad Flew .I remember that this feature worrked as well , before up then donwgraded the FW , I…"
"Is this correct ???"
"Thanx mate :) But I did it , and tried all AC from 3 to 3.1.5 , but still have this behaviour :I cannot access to the logs , with APM 2.0.18 , I didn't downgrade the GUI to 2.0.17 ( the rev I used for some times and wich worked fine ).I looked at…"
Hy all DIY UAV Builders ,I would need your Help about APM2.0.18 / FW AC3.1.5( First of all : I searched all around the forums to get the REAL response , and not only the same boring answer like :" look at the documentation " but allways fall on…
"An they FLY !!!!!! The very best mix Between Technology and WoodArt !!!"
"@ Joe Sleator -Yes , before I post here I spend almost 7 for 8 hours on the net and I probably make a round about it , I think now that's my serial connection to the OSD wich cause my issue , I can flash the .hex file into the Atmel328 in the OSD ,…"
"The same , impossible to do anything with the OSD , and now when I tried to come back to the 2.0 , see what's append :("
"Hello DIY mate :) I had spend many many hours trying to upgrade this MinimOSD ( I love it :) ), but I have some big troubles :1/ at the begening => allways "can't talk to bootloader"I googleise so many and many tricks to be able to flash the board…"
