Gender
Male
About
Location
Tampa, FL
Please tell us a bit about your UAV interest
quad racing now, thats all
Hometown:
Tampa
Activity Feed
"Yes, it is a fantastic board, but It's been sitting in a drawer for over 6 months, I have been more into the F3 racing scene. Nothing more."
"I no longer have a need for my PixRacer.If anyone wants it with GPS and the 2 power modules for $70 OBO please let me know.I purchased it direct from auavIf not ill put it on ebay, but figured I would give the guys at DIY a first chance.I think I…"
Hi everyone, I am the maker of the very first LEGO drone which I initially used an APM flight controller. Later I got with my friend Nick and we made our first Kickstarter with a full sized drone. But since then the FAA started requiring…
"Thanks Cala your feedback is much appreciated.So the compass, waypoints, rtl etc are all pretty much working now?Have you tried acro?"
"Randy, I have had my Pixracer in a drawer for several months now.How is the progress coming? Mainly wondered is there an official release of the firmware avail yet or is the p-racer version still under development.I am thinking on getting a 250…"
"Awesome, thanks Andrew, I think I tried with the 3.3 version, I will try again, you guys are the best! :-D"
"A quickly removable gps+mast would be ideal, take off when want to race/acro and put back on for leisure/auto ;-)
Humm...gotta break out the 3d printer again ;-)"
Humm...gotta break out the 3d printer again ;-)"
"Personally I do prefer the Motor 1/2/3/4 that relate to the motor number diagram vs the A/B/C/D tho"
"Found it, bottom of optional hardware, gosh missed that for a couple years now :D
Thanks again!"
Thanks again!"
"Cool, somehow all this time I missed it in MP.I do know I can calibrate the ESCs with the Tx and pixhawk/racer, but in cleanflight I use the master slider instead of the tx for calibration instead of the Tx.
But I'll check it out in MP then I'm sure…"
But I'll check it out in MP then I'm sure…"
Just a friendly suggestionI really like the Motor Test screen in clean flightI can test my motors individually, all at once, check motor directions and calibrate my esc.It's a great tool.
"Andrew,Can I ask a couple things:
You said "You can avoid it by doing the takeoff in STABILIZE mode and then switching to ALT_HOLD in the air"Well I'm not really so sure, when I switch the craft starts to sink, i have to move the throttle wildly for…"
You said "You can avoid it by doing the takeoff in STABILIZE mode and then switching to ALT_HOLD in the air"Well I'm not really so sure, when I switch the craft starts to sink, i have to move the throttle wildly for…"
"Cala,
Hehe, I'm sure it wont like it there ;-)
I don't have any interest in GPS flying and dont want a mast, really I just want acro and I plan on crashing a ton since it's a racer...but yeah if someone wants to use the gps I would put the batt back…"
Hehe, I'm sure it wont like it there ;-)
I don't have any interest in GPS flying and dont want a mast, really I just want acro and I plan on crashing a ton since it's a racer...but yeah if someone wants to use the gps I would put the batt back…"
"I did a few changes to make it "better, stronger" but a little more weight.
1) The stock 2mm standoffs broke on crashes to easy. So I put on some green aluminum standoffs on the outside because the plastic ones kept breaking and changed it to 3mm…"
1) The stock 2mm standoffs broke on crashes to easy. So I put on some green aluminum standoffs on the outside because the plastic ones kept breaking and changed it to 3mm…"
"Alt hold does not work for me at all, trying to take off it just scoots on the ground.
If I take off in stab and change to alt hold i have to throttle all over the place.
I tried to use gps functions and was not working that I could see, but i am…"
If I take off in stab and change to alt hold i have to throttle all over the place.
I tried to use gps functions and was not working that I could see, but i am…"
