Gender
Male
About
Location
Sanremo
Please tell us a bit about your UAV interest
Camera Recording
Activity Feed
"Hi folks. Another problem here. I've lost my radio and i bought a new one. Now i've a Taranis plus, before i had a Taranis.
Now the telemetry doesn't work anymore. I can see the Mode from the Pixhawk, but not on real-time. When i change mode now i…"
Now the telemetry doesn't work anymore. I can see the Mode from the Pixhawk, but not on real-time. When i change mode now i…"
"I can testify myself that the carbon-reinforced nylon props are sharper enough for cutting an entire finger, i don't show you the pictures because they are too rude. I think would be better stop talking about the different material of propeller and…"
"Hi. I've soldered a new Teensy 3.1 and flashed with your sketch. Now FUEL work and after changed the mode on the script, when i change mode on the Pixhawk i can see the confirmation on the radio. Still doesn't work A4 and A5, so no roll, but now the…"
"Hi.
I've reflashed the Teeensy with your files. Checked the firmware versione of the Taranis and is 2.0.13. The script changed value A. From the Teensy and Pixhawk i can read well the value of HDOP, HDG, Voltage and Altitude, but i can't read Fuel…"
I've reflashed the Teeensy with your files. Checked the firmware versione of the Taranis and is 2.0.13. The script changed value A. From the Teensy and Pixhawk i can read well the value of HDOP, HDG, Voltage and Altitude, but i can't read Fuel…"
"Yes. I've reflashed many times but i will try again.
Thank you
Lele"
Thank you
Lele"
"Thank you Louis. Taranis has firmware 2.0.13, the Pixhawk has Arducopter 3.2.
Both Tx and RX connected. I've tried Teensy alone on Telemtery 1 or 2 and togheter with 3DR Radio but doean't work. Work the voltage, the current, the arming, the height…"
Both Tx and RX connected. I've tried Teensy alone on Telemtery 1 or 2 and togheter with 3DR Radio but doean't work. Work the voltage, the current, the arming, the height…"
"Nothing....i've tried all but A3 and A4 are always 180 and-180. I can see the orizon move on the HUD windows on Mission Planner, but not on the Taranis..... :-( Anybody has an idea ?
Lele"
Lele"
"Thank you Wolke. i've reloaded the 2.0.13"
"Hi all folks.
First of all, thank you very much for your wonderful job. It's amazing, but i need your help.
I've bought the Teensy board 3.1, uploaded the last sketch from Luis on it, copied all the files to the root directory of Taranis's SDcard…"
First of all, thank you very much for your wonderful job. It's amazing, but i need your help.
I've bought the Teensy board 3.1, uploaded the last sketch from Luis on it, copied all the files to the root directory of Taranis's SDcard…"
"https://www.youtube.com/watch?v=cNPSvKuDQ38
I've made this the last summer. I had problems with yaw on the copter but the stabilization from the two axis gimbal was ok. Now i'm not using it anymore.
Lele "
I've made this the last summer. I had problems with yaw on the copter but the stabilization from the two axis gimbal was ok. Now i'm not using it anymore.
Lele "
"Special permission ? ;-P
It's more "Jump and Run" than "Ask permission and wait", i think !
Lele"
It's more "Jump and Run" than "Ask permission and wait", i think !
Lele"
