Gender
Male
About
Location
Medellin
About Me:
http://estebanjaramillo.co/blog/ https://www.youtube.com/channel/UCmIT7XFCFX9xthoj2WFh9MA
Please tell us a bit about your UAV interest
Multicopters, Aerial Video/Photography, FPV
Hometown:
Medellin
Activity Feed
"thank you very much! I think it should be this way as default or at least stated somewhere in the readme.
Thanks again"
Thanks again"
"To the guys using the wolkstein fork:
I can't get the voltage to show the correct value. In the telemetry page where it shows every cell they're all changing from 0 to 1 values, everything else seems to be working just fine.
I'm using the last…"
I can't get the voltage to show the correct value. In the telemetry page where it shows every cell they're all changing from 0 to 1 values, everything else seems to be working just fine.
I'm using the last…"
"@Randy here are the logs:
Log 1: http://www.droneshare.com/mission/33300Log 2: http://www.droneshare.com/mission/33302"
Log 1: http://www.droneshare.com/mission/33300Log 2: http://www.droneshare.com/mission/33302"
"Randy the mag_field from some of my logs is above 30%, I get messages like this:
Test: Compass = FAIL - Large change in mag_field (43.65%)
My pixhawk is mounted on a TBS Discovery with Neo 6m GPS/Compass mounted on a pole 12cm above the top…"
Test: Compass = FAIL - Large change in mag_field (43.65%)
My pixhawk is mounted on a TBS Discovery with Neo 6m GPS/Compass mounted on a pole 12cm above the top…"
"Randy the mag_field from some of my logs is above 30%, I get messages like this:
Test: Compass = FAIL - Large change in mag_field (43.65%)
My pixhawk is mounted on a TBS Discovery with Neo 6m GPS/Compass mounted on a pole 12cm above the top…"
Test: Compass = FAIL - Large change in mag_field (43.65%)
My pixhawk is mounted on a TBS Discovery with Neo 6m GPS/Compass mounted on a pole 12cm above the top…"
"where should I put my APM 2.6? I've read somewhere it shouldn't be in the top compartment near the motor because of vibrations, what about using something to lower the vibrations?"
"también revisa que los tornillos de los motores no estén tocando el cobre"
"no necesariamente Norman, podría ser también que los motores no estén hechos para andar a 4s con la helice que tiene"
"Ai no puede mantener el dedo en el motor no es normal, que motores son y que batería usa?"
"Que tan calientes están? Es normal que unos trabajen más q otros en el vuelo"
"So is rc14 working fine? there're some ppl having bad accel/gyro/baro pre-arm alarms"
"I just connected my receiver wrong, my ground was in the 5v pin and the 5v was in the signal pin, what could I have damaged? the quad seems to be flying at least in STAB and Alt hold in my living room but the camera switch and the gimbal are not…"
"So I already did this and I'm only getting 100%, 75% or 0% in the RSSI"
"it's ok man I just want to know if it's working ok as the guy above wrote it won't register correctly"
"Can anyone confirm this?"
