Gender
Male
About
Location
Roma
About Me:
my hobbies are computers, electronics, model aircraft and helicopters.
Please tell us a bit about your UAV interest
Easy star and The ArduPilotMega APM2 Hobbyking Quadcopter Frame 680mm
Hometown:
Roma
Activity Feed
"Ciao
Ho un consiglio da darti, toglierei le colonnine e dati in metallo e le sostituirei con delle colonnine e dati in teflon o ottone.
Le colonnine in metallo posso disturbare la bussola, e dare un setup errato o delle letture in volo non coerenti.…"
Ho un consiglio da darti, toglierei le colonnine e dati in metallo e le sostituirei con delle colonnine e dati in teflon o ottone.
Le colonnine in metallo posso disturbare la bussola, e dare un setup errato o delle letture in volo non coerenti.…"
"Hi,I wanted to know of an oddity occurred during the last flight performed after took off as I took in share mode AltHold the drone unilaterally increased the speed of the motors for a split second, and then stabilized (as you can see in the video…"
"Thanks @Randy,in the previous post I have not attached the log ...if it can be useful.greetings
Log"
Log"
"Hi,I wanted to post movies inherent in great fw 3.2, the first movie is with a wind of about 20-25 km / h, and I wanted to point out the excellent stability and Alt Hold PosHold although urged by the wind.The second is a movie with no wind but even…"
"Hi Randy, Thank you very much for the explanations very clear on the EKF error occurred during the flight. Yes I am using a VR μBrain and there is the pin for the current measurement. Ok for the suggestion to set the COMPASS_MOTCT = 0 will do this…"
"Hi, During a flight with 3.2RC14 I think I had a false positive with the EKF error as documented by logs and figure. place the log for error analysis and a possible explanation.
Thanks Fabio
regards
2014-11-01 14-56-38.zip"
Thanks Fabio
regards
2014-11-01 14-56-38.zip"
"Hi Randy, I think I had the same problem with the fw 3.2RC13 failsafe dcm while I was flying the quad landed alone. log has many errors Ekf failsafe as you can see in the picture.
regards"
regards"
"Hello everyone, Randy you look at my log to give me an opinion on my drone, if you can find the log of the improvements to do on the setting.
Sounds good to me but a good analysis on the log I might reveal optimal values.
the frame is a Reptile…"
Sounds good to me but a good analysis on the log I might reveal optimal values.
the frame is a Reptile…"
"Hello Roberto, We can announce some news about the new firmware, it is a stable release or beta. Supports pwm, ppsum and sbus at the same time. greetings"
"Hello, Today I made the first flight with VR Micro Brain 5.1, I was very satisfied with the behavior in flight, very smooth, without bumps and jolts, listening to the sound of their engines was very smooth and progressive accelerations and…"
"Hello Micha, I solved I changed the ESC and everything is ok, for the calibration I made one at a time with the receiver.
regards Fabio"
regards Fabio"
"Hello Micha, Yes, I also tried individually directly with the receiver, but the strange thing is that at the start and after the initialization of the flight controllers ESC start doing Beep, Beep as if there is no signal from the FC. Emile told me…"
