Gender
Female
About
About Me:
Sparkly code princess.
Please tell us a bit about your UAV interest
I took part in the multicopter girls camp that was held in summer 2013 in the Technische Universität Ilmenau in Germany and since them I've thinking of building my own UAV.
Hometown:
Mungia, Basque Country
Activity Feed
"Hi again,
I've just gone through all the replies, checking my calibrations...and I read one of you first answers where you were suggesting to try throttle down-left. Turns out I just armed my copter holding throttle in the down-right position. \:D/ …"
I've just gone through all the replies, checking my calibrations...and I read one of you first answers where you were suggesting to try throttle down-left. Turns out I just armed my copter holding throttle in the down-right position. \:D/ …"
"Thanks for the idea! I will definitely try recalibrating the compass."
"Hi,
1. Yes, it's mode 2. Throttle and yaw stick is the left stick.
2. I haven't.
3. I have created some modes in my radio following this guide, http://quadcoptergarage.com/upgrading-my-quadcopter-from-kk2-to-apm....
Thanks for answering. ;)
Cheers,"
1. Yes, it's mode 2. Throttle and yaw stick is the left stick.
2. I haven't.
3. I have created some modes in my radio following this guide, http://quadcoptergarage.com/upgrading-my-quadcopter-from-kk2-to-apm....
Thanks for answering. ;)
Cheers,"
"Not yet. ;) I'm waiting to see if I can figure out this issue before doing my first flight and tunning anything. haha"
"I'm using the turnigy 9x, the throttle was reversed but I changed it, so that 0 is down and the higher values up. I'm going to double check all calibrations when I go back home. I'm using the telemetry radio but I don't get any message or prearm…"
"Hi,
Thanks for answering. ;) You are right that would be really easy to overlook but I dont think thats my issue. I've the apm 2.6 and I forgot to say that when I arm using the ground station I'm not powering by usb I'm using the telemetry radio.…"
Thanks for answering. ;) You are right that would be really easy to overlook but I dont think thats my issue. I've the apm 2.6 and I forgot to say that when I arm using the ground station I'm not powering by usb I'm using the telemetry radio.…"
"Uhm... Just realized something, I'm not at home right now but when Im on the radio calibration, I see my throttle range is ok around 1100 < x < 1900, but using the terminal and testing the reading I Think channel 3 goes from 0 to 1000 something...…"
"Yes, its stabilize. ;) The weird thing is that if the radio is switched on I can only arm it if the rc is in the arm position and click on arm in the apm planner, but I cant just using radio. "
"Thanks for answering, I tried that too with no luck. :( At first I had the throttle reversed but I fixed that."
"I can arm using the groundstation, as I said, if I have the radio switched off or if I have it switched on in arm position (throttle down, rudder right) but I can't arm just using the RC. :S which made me think I may have something wrong... but cant…"
Hi there,First of all sorry if this has been answered, I've checked posts regarding issues arming the copter but I cannot find a solution.I'm having trouble to arm my copter and I'm out of ideas. I'm using APM planner which I've updated to the…
