Gender
Male
About
Please tell us a bit about your UAV interest
Quadcopter only, with FPV.
Activity Feed
Hi,I posted the same topic on ardupilot forum with no success, so I post here.first of all my config :- 3DR Pixhawk mounted with foams- Quadcopter S500 frame (equivalent of F450 but stiffer arms)- T-Motor MS2216-9 and Graupner E-Prop 9-5"- 400g 4S…
"What you see page 6 is an analog "pressure" port (not the sensor), namely "ADC 6.6V" in the Pixhawk case. The pressure sensor (MS5611) is powered by VDD_3V3_SENSORS according to the "Sensors" sheet.
I had a look further and it looks like my BQ24315…"
I had a look further and it looks like my BQ24315…"
Hi,I had a crash last week with my quad and although it was not too violent and my (3DR) Pixhawk was mounted on a soft foam I think one part of the power circuit was broken. Now my 3DR Lea6H + Compass is weakly powered (led is weak, no GPS fix and…
Hi,I have a Pixhawk since January 2014, and I realized a couple of weeks ago that I have an issue since the beginning. I've always found that level is not perfect, especially after a few minutes of flight (I compensate it with my sticks). I thought…
"Same for me, use the beeper as a lost model finder could be really helpful. The buzzer alarm trigger conditions suggested by Marc MERLIN are great."
"Thanks for analyzing my log.
I tried to change my PID values yesterday, and the result is :
- the P-gain of about 0.1 is good, in acro mode I have a very sharp response without oscillations. I have a slight overshoot, but the phenomenon is probably…"
I tried to change my PID values yesterday, and the result is :
- the P-gain of about 0.1 is good, in acro mode I have a very sharp response without oscillations. I have a slight overshoot, but the phenomenon is probably…"
Hi all,I have a little problem with my quad, and as I tried many usual solutions, I'm posting here.I notice a slight (but visible) roll/pitch instability when hovering, in Acro/Stabilize/AltHold modes (and other). It doesn't looks like an…
"Hi,
Did you tried to put the sd-card in your computer and format the sd-card (FAT32) ?"
Did you tried to put the sd-card in your computer and format the sd-card (FAT32) ?"
"@Kevin Hester, thanks, I tried, but it didn't work, no connexion at all. I have a pixhawk and a samsung galaxy S2 (rooted and usb-host activated). I tried both 57600 and 115200 link speeds. When I click on "connexion", something appears for about…"
"Hi, and thanks for developping this amazing soft.
One question : could we imagine to directly connect the smartphone to the card mini-usb ? This could be great for people who doesn't care about telemetry but wants to configure parameters or…"
One question : could we imagine to directly connect the smartphone to the card mini-usb ? This could be great for people who doesn't care about telemetry but wants to configure parameters or…"
