"Copter-3.3.2-rc2 is available through the mission planner's beta firmwares link. Changes are in the release notes (https://github.com/diydrones/ardupilot/blob/master/ArduCopter/Relea...) but here they are along with a video showing the major reason…"

"Hi dev, I have been following the dev. here http://firmware.diydrones.com/Copter/2015-06/
Up til now there has been updates on the "latest but the last update is 8 june.
Is it placed elsewhere or?
in github I can see there has been changes.
Just of…"

"OK thanks, but the only way to access the pix with usb was to take the card out and format it in my PC.
Anyway it is fixed now."

"Found the problem, for some rason the sd card had to be formated. Did the firmware upload set the sd card as unformatted?"

"Tried loading the Beta version today but it failed with error: could not download the hexfile.
Trying again and the comport on my PC show up for a second when I connect the Pixhawk.
On the Pixhawk the LED is solid  white and this seems not normal.…"

"I had the same problem until I loaded the MP beta version."

"Loaded 3.3 today, previous 3.2.1  flies fine in PosHold but with 3.3 I got error (Flightmode err 16) and PosHold is not working
Loaded 3.2.1 back and it is rock solid in Poshold.
I did not change anything between the 2 versions

Log from 3.3…"

"Loaded 3.3 today, previous 3.2.1 flies fine in PosHold but with 3.3 I got error (Flightmode err 16) and PosHold is not workingLoaded 3.2.1 back and it is rock solid in Poshold.I did not change anything between the 2 versionsDid this (Note #1:…"

"Loaded 3.3 today, previous 3.2.1 flies fine in PosHold but with 3.3 I got error (Flightmode err 16) and PosHold is not workingLoaded 3.2.1 back and it is rock solid in Poshold.I did not change anything between the 2 versionsDid this (Note #1:…"

"Is 3.2 released?
I see you have started with 3.3
"Author: Randy Mackay <rmackay9@yahoo.com> Date: Mon Aug 18 12:56:22 2014 +0900 Copter: range check ACRO_EXPO to be no more than 1 APMVERSION: ArduCopter V3.3-dev""

"Christian
If  you want to compare the baro altitude and the GPS altitude yiu have to compare CTUN-BarAlt and GPS-RelAlt"

"Compiled the master rc6
This setup:
#define FRAME_CONFIG OCTA_QUAD_FRAME
// uncomment the lines below to save on flash space if compiling for the APM using Arduino IDE. Top items save the most flash space//#define CLI_ENABLED DISABLED // disable the…"

"Today I did the autotune on my quad with success. After I tested Alt hols and loiter and all is good.
Attached is the log. total 9 minutes and the autotune took c.a 4 minutes. Very interesting to see.
I had a gopro camera onboard and I plan to…"

"Further more, tried MP 1.2.53
Started with the working external compass, then did a hot swap testing the 2 not working, (se above) and the now show OK in the HUD, strange?"