"Very well done Mark!Did you see the session "how to geotag" your pictures using the Mission Planner?
(I helped to write the first version of this tutorial)
If you have the flight log is possible to do it when you want... (pos- processed)
"@Frejus, if time camera was OK your timing offset should be around 60s, not in the day before... Hahaha! (I'm joking...)Well, if you believe the times are close, try to adjust this offset yourself, I do it in all my procedures here.Go ahead and tell…"
"@Frejus,
It's obvious you have a big problem with timing offset(-6204,912s), you should not only press "estimate offset" and believe 100% on that. I suggest you do your self the timing adjust as well, start checking your ground station date and time…"
I just updated my PX4 to AC3.1 and after that I have no data from my spektrum satellite receiver when I try to do the radio calibration (the biding led on receiver is orange that means found TX)
Could be any incompatibility…"
"Hi Marco, please, have you(or 3DR) a suggested parameter list for an hexacopter with pixhawk/PX4 system?
I did not tried the auto tune on PX4, and if it works
tks! "
A client of mine just sent me back a damaged jDrones' APM board, problem description: "BAD GYRO message on HUD"It means the problem is not only regarding to 3DR boards, right?"
"@TCIII, sounds good!
I installed the PX4 (with spektrum satellite receiver) on my hexacopter, I have tested Stabilize, Hold Alt and Loiter, so far so good it looks very well. I will try auto-mode soon too... ;-)
See you!
Man, I had exactly the same issue here (glitching the signal from RC), I was using the 3DR PPM encoder.
The problem disappear when I change the PPM encoder for a Spektrum Satellite Receiver, everything works fine now and I have no…"
"Well, it is made with a BIG computer processing the IR cams in high speed loop. If is really possible to do it just with on-board processing that guys should show it to us, then we could say "Wow, amazing". It is not so really impressive to me…"