Gender
Male
About
Location
Fremont, CA
Please tell us a bit about your UAV interest
Just really enjoy the hobby of radio controlled things. Especially aircraft. Also love the idea of flying FPV. My PRIMARY interest in UAV the simply the ability to have the aircraft fly home if there is a problem.
Hometown:
Fremont, CA
Activity Feed
"OK so the docs over on Google Code suggest either disabling the 12v regulator all together and only using the power off the telemetry. Or plug 12v to the camera and power/video in on the OSD and it's power out goes to the transmitter. What I did is…"
"Hey all, so this was the exact same problem I was having. I posted here over a week ago. I had a different setup however. I was using a "Spektrum Compatible" (very much in quotes) OrangeRX R910 9ch Rx. After lots and lots of different things,…"
"Hey guys, I don't mean to hijack the post, but I am having a similar problem with a different setup. I have the APM with the 2.9.1 ArduCopter firmware installed. Mine is a "Stretched X" style frame with the top half isolated from the bottom half.…"
Hey all I hope that I am not asking a question that gets asked a billion times but I am not sure what else to try. At first I thought it was my new Simon K ESC's so I put my old Turnigy Plush 25A back on it and got the same problem. I also…
