About

Gender

Male


About Me:

I am an undergrad Junior in Electrical Engineering. very interested in working with UAV's.


Please tell us a bit about your UAV interest

I am interested in many aspects of UAV's including firmware, telemetry, and automation. I am working on a research project where we are seeing how secure the telemetry unit is on drones.


Hometown:

St. Louis


Activity Feed

Hiroshi Fujii posted a discussion
Hi, I have created a new mode in the arducopter code which does some image processing and stays in place using that image. Now I would like to be able to include that in the waypoints option. Meaning that I would like to right click on the flight…
Jun 22, 2015
Hiroshi Fujii replied to Joe Dvorak's discussion Connecting non-3DR GPS in ArduRover User Group
"It seems that the signal was not inverted!! Messing with the baud fixed the problem! Although for me when I did auto the GPS setting did not work very well. I changed the GPS setting to NMEA and that was better."
Jun 18, 2015
Hiroshi Fujii replied to Joe Dvorak's discussion Connecting non-3DR GPS in ArduRover User Group
"Thank you for your help, it ended up working when i changed the baud rate and made it 5hz. "
Jun 18, 2015
Hiroshi Fujii replied to Joe Dvorak's discussion Connecting non-3DR GPS in ArduRover User Group
"I just tested all the voltages and the signal was indeed 3.3V. And yes, after some googling I figured out that RTS and CTS was part of flow control. However I did disable flow control on the GPS side so it should not matter rather I have those pin…"
Jun 16, 2015
Hiroshi Fujii replied to Joe Dvorak's discussion Connecting non-3DR GPS in ArduRover User Group
"Thanks for both of your replies.

I feel that the problem could lie in the fact that I am not level shifting the signals. My reasoning behind not level shifting the signal is that the documentation mentions that the output is TTL level with flow…"
Jun 16, 2015
Hiroshi Fujii replied to Joe Dvorak's discussion Connecting non-3DR GPS in ArduRover User Group
"Hi,
I am also trying to connect a trimble GPS to the pixhawk and not getting any response. My version of the trimble, BD982 has a 3.3V TTL output that outputs a 3.3V signal. Thus, I figured that level shifting should not be necessary. I have…"
Jun 15, 2015