Gender
Male
About
Location
Bogotá
About Me:
Encuentra hobbies y soluciones tecnológicas para audiovisuales. Find it hobbies and audiovisual solutions
Please tell us a bit about your UAV interest
DRONES
Hometown:
Bogotá
Activity Feed
"Hola Tengo el Mismo módulo y no enciende APM 2.5 NO FUNCIONA.
Pudiste solucionar el problema?
Saludo!"
Pudiste solucionar el problema?
Saludo!"
"HELLO, THIS WORKS FOR IO PX4 FMU?
Thank you."
Thank you."
"Hi, thanks for your answer, just like you in search of new knowledge.
I'll try one to one esc.
If you know or see some info on the web about Remzibi please let me know.
Greetings."
I'll try one to one esc.
If you know or see some info on the web about Remzibi please let me know.
Greetings."
"Hi,
/ / / / / / / Can not save the ESC Calibration in PX4 FMU IO / / / /
You know it could be?
Another question.
You know how I connect to OSD Remzibi px4 as if telemetry data and to see video on my monitor?
We appreciate evidence.
Thanks for you…"
/ / / / / / / Can not save the ESC Calibration in PX4 FMU IO / / / /
You know it could be?
Another question.
You know how I connect to OSD Remzibi px4 as if telemetry data and to see video on my monitor?
We appreciate evidence.
Thanks for you…"
"Ardupilot on PX4 + IO won't arm motors.
Hi I have the same problem Mystery 30A ESC's ...
You Might explain "load up the firmware ArduCopter" Bootload firmware?
System works without problem, arm and disarm perfectly.
Safety Switch OK.
Calibration…"
Hi I have the same problem Mystery 30A ESC's ...
You Might explain "load up the firmware ArduCopter" Bootload firmware?
System works without problem, arm and disarm perfectly.
Safety Switch OK.
Calibration…"
"Tienes alguna información? estoy en lo mismo."
"Hi I have the same problem Mystery 30A ESC's ...
You Might explain "load up the firmware ArduCopter" Bootload firmware?
System works without problem, arm and disarm perfectly.
Safety Switch OK.
Calibration OK, ENGINES TURN.
Connect and disconnect…"
You Might explain "load up the firmware ArduCopter" Bootload firmware?
System works without problem, arm and disarm perfectly.
Safety Switch OK.
Calibration OK, ENGINES TURN.
Connect and disconnect…"
"Hi I have the same problem Mystery 30A ESC's ...
You Might explain "load up the firmware ArduCopter" Bootload firmware?
System works without problem, arm and disarm perfectly.
Safety Switch OK.
Calibration OK, ENGINES TURN.
Connect and disconnect…"
You Might explain "load up the firmware ArduCopter" Bootload firmware?
System works without problem, arm and disarm perfectly.
Safety Switch OK.
Calibration OK, ENGINES TURN.
Connect and disconnect…"
"Hello, at the end of the module power does not turn on APM. 5v ESC in APM IN1 + POWER MODULE +JUMPER= works but the voltage measurement is not accurate, still looking soluci'on.
Thank you.
, "
Thank you.
, "
"Hello,
A curiosity ... as I turn apm 2.5 and esc with 2 separate batteries.
Battery 1: APM 2.5 and FPVBattery 2 Engines - BECS (servos)
Unrecognized?
Thank you!"
A curiosity ... as I turn apm 2.5 and esc with 2 separate batteries.
Battery 1: APM 2.5 and FPVBattery 2 Engines - BECS (servos)
Unrecognized?
Thank you!"
Hello, I have power module Connection, with an my apm 2.5 does not work.Dual Suply, with bec and jp1 working properly.JP1 installed and not installed, will not start 2.5My question is:I have to connect 5v bec outputs and jumper and power…
