Gender
Male
About
Please tell us a bit about your UAV interest
Im just building my 1st hexacopter.
Hometown:
Prague
Activity Feed
"Did you find cause of this issue? Same thing happened to my hex today:
Red line is altitude from barometer in meters (+/- same as from GPS), green line is throttle input and blue is motor 1 output.
I started in 'stabilize' mode, climbed to 5…"
Red line is altitude from barometer in meters (+/- same as from GPS), green line is throttle input and blue is motor 1 output.
I started in 'stabilize' mode, climbed to 5…"
"Your bosrd has original components - "MLF-8-PAD" has leads from the bottom side. Now I see that there is a second 3.3V regulator (for DSM input) on left side which is also replaced on cloned version with the same 'alternative'."
"I finally found the reason of failure of my cloned Pixhawk. Even cloners claim that they are selling perfect clones of open source hardware, they don't.
This is layout of offcial 2.4.5 version from https://github.com/PX4/Hardware . Notice main 3.3V…"
This is layout of offcial 2.4.5 version from https://github.com/PX4/Hardware . Notice main 3.3V…"
"According to following videos, there is something wrong in design or manufacturing process, but Pixhawk seems to have serious issues with reliability:
https://www.youtube.com/watch?v=4lRFwVN1vFY
https://www.youtube.com/watch?v=QIEDnKWyKms
I would…"
https://www.youtube.com/watch?v=4lRFwVN1vFY
https://www.youtube.com/watch?v=QIEDnKWyKms
I would…"
"Hi Mathieu,
I found following on the second thread:
PX4IO SDCard Update:
Download px4io-v2.bin http://firmware.diydrones.com/PX4IO/2014-03/2014-03-02-22:03/PX4IO/
Copy to Pixhawk SDCard
Press and hold Safety button and power up Pixhawk
My…"
I found following on the second thread:
PX4IO SDCard Update:
Download px4io-v2.bin http://firmware.diydrones.com/PX4IO/2014-03/2014-03-02-22:03/PX4IO/
Copy to Pixhawk SDCard
Press and hold Safety button and power up Pixhawk
My…"
"Hi, same thing happend to my unit yesterday, with my 'cloned' version from alixpress (2.4.5).
Strange is that this was new unit - I even didn't connect RC receiver or ESCs to it. There were just 433Mhz trasmitter, GPS, speaker, button and usb port…"
Strange is that this was new unit - I even didn't connect RC receiver or ESCs to it. There were just 433Mhz trasmitter, GPS, speaker, button and usb port…"
