About

Gender

Male


Location

Blodgett, OR


About Me:

Work and play with Computers


Please tell us a bit about your UAV interest

Been flying since I was 66 EXI 450 Heli Wing Wing Z84 HK 560 Alien with RTFHawk Crius AIO Pro V2 MegaPirate


Hometown:

Summit, Oregon / South for the winter


Activity Feed

Jerry Campbell replied to Nicholas Lee's discussion Airboat Differential Motors Unsure about Arduboat set up. Need guidance/advice in ArduBoat User Group
"Hi Nicholas, I'm not sure how much help I'll be.
I built a Catamaran with differential steering a couple of years ago using an APM.
I had a Turnigy 9X tx at the time. It worked great except I did not like it that the turning radius was unacceptable,…"
Jan 21, 2018
Jerry Campbell commented on noeL's blog post FrSky Taranis Setup 6 Flight Modes plus 1 for APM Ardupilot
"Do you mean on the Logical Switches?"
Oct 28, 2015
Jerry Campbell commented on noeL's blog post FrSky Taranis Setup 6 Flight Modes plus 1 for APM Ardupilot
"Thanks noeL,
The Taranis speaks the flight modes.
Without the delays the Taranis speaks the every flight mode that it passes on the 3 position switch. I think that would be too confusing.
I was thinking that maybe I could delay the sounds a little…"
Oct 28, 2015
Jerry Campbell commented on noeL's blog post FrSky Taranis Setup 6 Flight Modes plus 1 for APM Ardupilot
"I know this was asked a while back but I don't understand. On the Flight Mode screen in Mission Planner, How do I keep it from going to flight mode 6 first and then to the correct mode when I change flight modes? Everything seems to work and it…"
Oct 27, 2015
Jerry Campbell replied to Jerry Campbell's discussion Strange GPS Problem in ArduCopter User Group
"After trying everything I could think of, I thought it seems like maybe there was only a one way transmission to the GPS. While messing around with the plugs and the wires one wire broke so I decided to build a new harness. And yahoo that solved the…"
Oct 21, 2015
Jerry Campbell replied to Jerry Campbell's discussion Strange GPS Problem in ArduCopter User Group
"I built another wiring harness from the GPS/Compass to the GPS, i2c. telemetry/OSD ports and that seems to have solved the problem. I tested it once after I could see satellites in Mission Planner and It loiter worked. On the second test with a new…"
Oct 17, 2015
Jerry Campbell posted a discussion in ArduCopter User Group
I seem to be stuck between a rock and a hard place. I'm setting up a Pixhawk Lite with an lea6h gps. I installed 3.3 and it flies great. I'm trying to figure out why my lea6h does not work even though Mission Planner says I have a 3d fix and shows…
Oct 17, 2015
Jerry Campbell replied to Jerry Campbell's discussion Compass Problems in ArduCopter User Group
"That appears to have solved the problem. We shall see when I can get it to fly.
Thanks again
Jerry"
Sep 26, 2015
Jerry Campbell replied to Jerry Campbell's discussion Compass Problems in ArduCopter User Group
"Thank You my friend,
I will try to change it to plane and back and see."
Sep 26, 2015
Jerry Campbell posted a discussion in ArduCopter User Group
Compass inconsistency. This is a  PixHawk Lite with an M8N GPS. The external compass is on top and pointed in the right direction.Both compasses calibrate. They show up the the parameter list with Id's and offsets.But, in the main window in MP only…
Sep 26, 2015
Jerry Campbell replied to DG's discussion What laptop are you using with Mission Planner? in ArduCopter User Group
"I am running MP on a 10" Windows 10 tablet with an Atom Quadcore with 2 gigs of ram. It works great.
Jerry"
Aug 27, 2015
Jerry Campbell replied to Ben's discussion two motor with different speed. in ArduBoat User Group
"Thanks David, I've never used ArduRover, soon I hope. I have flown MegaPirate, APM 2.6 and now a Pixhawk. I am looking forward to ArduRover/Boat.
Jerry
 "
Aug 12, 2015
Jerry Campbell replied to Ben's discussion two motor with different speed. in ArduBoat User Group
"I do not have a controller on my boat yet so I am not sure if this applies.
I am running 2 motors and speed controllers and set up differential steering by mixing channels on the TX . In order for the throttle to be balanced between the two motors…"
Aug 11, 2015
Jerry Campbell posted a discussion in ArduCopter User Group
Hello Friends,I am having a strange thing happen here.I have been flying my APM 2.6 for about 6 months on various frames. It works great. The last month or so I have been flying V3.2R10 It worked great.I mounted the APM on an F450 frame and put 3.2…
Dec 1, 2014
Jerry Campbell posted a discussion in ArduCopter User Group
Hello Friends,   I have 6 flight modes set up using my Gear and 3 way switches. They work fine. I would like one more flight mode, Stabilize in the Simple mode using my throttle hold switch. Can you have more than 6 Flight Modes?Thank YouJerry
Aug 24, 2013