About

Location

Panama City, FL


About Me:

Retired USAF, now a government contractor working aviation and homeland defense issues


Please tell us a bit about your UAV interest

Flying IRIS+ for purely recreational purposes. Used to race 1/8 electric cars and trucks, but never really got interested in flying models until recently.


Hometown:

Panama City, FL


Activity Feed

Jim Anslow replied to vf171's discussion Weird Iris+ behavior.. Hard landing in IRIS
"I think Michael is on to something here about switching out of ALT-HOLD when landing. My understanding of the firmware prior to the most recent update is this, and please feel free to correct me if I am mistaken...
In LOITER mode, you can reposition…"
May 30, 2015
Jim Anslow replied to Jim Anslow's discussion Iris+ Up In Smoke in IRIS
"For any who have been following this incident, here is the latest update....
After 27 days, I finally received my replacement Iris+ from 3DR. When Technical Support was first contacted, they were eager to get their hands on my damaged unit to try to…"
May 13, 2015
Jim Anslow replied to Jim Anslow's discussion Iris+ Up In Smoke in IRIS
"I considered that option, but I have too much invested in my Iris+. Considering that, like the Iris+, the Solo does not include a gimbal, and I have a Tarot for my Iris+, that's nearly $400 that I have saved right there. I have 3 spare batteries for…"
Apr 22, 2015
Jim Anslow replied to Jim Anslow's discussion Iris+ Up In Smoke in IRIS
"Just an update on the situation...
After corresponding with Enrique from 3DR, they have offered to either replace my Iris+, or provide a store credit for the purchase price should I decide to ourchase a new Iris+ from another vendor. 
Because of my…"
Apr 22, 2015
Jim Anslow replied to Jim Anslow's discussion Iris+ Up In Smoke in IRIS
"Avidh,

I was ready to post the logs for you, then I realized it exceeded the maximum file size (7MB). I will try to parse it down and get it uploaded tomorrow."
Apr 20, 2015
Jim Anslow replied to Jim Anslow's discussion Iris+ Up In Smoke in IRIS
"I pulled the battery immediately after the incident, and put it on my balancer after taking a good look at it. In addition to there being no visible damage, it was still showing 3.76-3.77v in each cell. I was able to discharge it down to 10.8v, then…"
Apr 17, 2015
Jim Anslow replied to Jim Anslow's discussion Iris+ Up In Smoke in IRIS
"The video is at the YouTube noted in my post, or you can check it out at http://diydrones.com/video/upinsmoke."
Apr 16, 2015
Jim Anslow replied to Jim Anslow's discussion Iris+ Up In Smoke in IRIS
"Actually, at the end of the video, I was removing the battery, and it was fine. No indication at all of what it had just been through."
Apr 16, 2015
Jim Anslow posted a discussion in IRIS
Don't get me wrong. This isn't intended to be a slight against 3DR in any way. I've never had anything but pleasant dealings with them. It's just a very interesting occurrence with my Iris+ from earlier today.After about 6 minutes of flying hard…
Apr 16, 2015
Jim Anslow replied to kevin's discussion Iris+ takes flight then lands itself thrice in IRIS
"No problem. I think I got the problem figured out. Unfortunately, it led to anothe rissue which was totally unexpected. I have posted that story under a new topic."
Apr 16, 2015
Jim Anslow posted a discussion in IRIS
Does anyone know if there is a way to evaluate the performance of each individual motor through the logs which are created? It appears that I am getting more output from the rear motors than the front, particularly during take-off.I have calibrated…
Apr 15, 2015
Jim Anslow replied to kevin's discussion Iris+ takes flight then lands itself thrice in IRIS
"Kevin,

I'd really like to know what throttle parameters you ended up adjusting to resolve all your problems. I am having a similar issue."
Apr 15, 2015
Jim Anslow replied to Jim Anslow's discussion TH9X Naming Function
"Not the solution, but thanks for the try. All I get is the lower case alphabet, digits, and some punctuation. I was able to figure it out, though, as I noted in my reply to Bill."
Mar 7, 2015
Jim Anslow replied to Jim Anslow's discussion TH9X Naming Function
"Thanks for the reply Bill. Your suggestion got me to thinking about it, and I was able to figure it out. After you enter a lower case character, if you immediately press the left arrow, it will toggle the case to upper case for any characters…"
Mar 7, 2015
Jim Anslow posted a discussion
Hi Guys,I realize that this is a very elementary question to be asking in this forum, considering many of the highly technical posts I have viewed, but here goes...I adding a new configuration to the FrSky TH9X I received with my Iris+, I would like…
Mar 4, 2015