Gender
Male
About
Please tell us a bit about your UAV interest
Flying a O3VRQuad
Hometown:
Darwin
Activity Feed
"Rob,
I am not an electronics expert, but I bought this USBASP from a local Jaycar store in Australia: http://www.freetronics.com.au/products/usbasp-icsp-programmer-for-a...
Any USBASP should work but you need this programmer to burn the…"
I am not an electronics expert, but I bought this USBASP from a local Jaycar store in Australia: http://www.freetronics.com.au/products/usbasp-icsp-programmer-for-a...
Any USBASP should work but you need this programmer to burn the…"
"Rob,
The following youtube video explains how you do it:
https://www.youtube.com/watch?v=MY9glaXP8HI
At 16:10 the guy shows you how to burn the bootloader."
The following youtube video explains how you do it:
https://www.youtube.com/watch?v=MY9glaXP8HI
At 16:10 the guy shows you how to burn the bootloader."
"Robert,
Do you have power on both sides of your OSD when you upload the character file?
Also, as I have mentioned before, I have tried EEPROM Clear to erase the OSD as best as I can, but it keeps on giving me garbage characters.
I have found…"
Do you have power on both sides of your OSD when you upload the character file?
Also, as I have mentioned before, I have tried EEPROM Clear to erase the OSD as best as I can, but it keeps on giving me garbage characters.
I have found…"
"Robert,
I had a similar problem with my quadcopter's OSD. It has telemetry plugged in, no problems with that. When I switch on my TX, the overlay works fine, but as soon as the gps show the number of sats, the overlay will turn of. If I press reset…"
I had a similar problem with my quadcopter's OSD. It has telemetry plugged in, no problems with that. When I switch on my TX, the overlay works fine, but as soon as the gps show the number of sats, the overlay will turn of. If I press reset…"
