Gender
Male
About
Location
College Place, WA
About Me:
Computer Engineering Student
Please tell us a bit about your UAV interest
I am interested in integrating the ArduPilot and Gumstix Overo platforms for a variety of UAV applications.
Hometown:
College Place, WA
Activity Feed
"Found how to uninstall it.
Download Dr. Mingw from https://code.google.com/p/jrfonseca/wiki/DrMingw. I believe the 32-bit version is installed with ArduPilot Mission Planner 2.0.
Extract the files.
Open up the Windows command prompt in…"
Download Dr. Mingw from https://code.google.com/p/jrfonseca/wiki/DrMingw. I believe the 32-bit version is installed with ArduPilot Mission Planner 2.0.
Extract the files.
Open up the Windows command prompt in…"
"Haha, true. But the APM Mission Planner 2.0 installer has an option to include it in the installation."
Hey guys,I accidentally installed Dr. Mingw while installing the ArduPilot Mission Planner 2.0. Do you guys know how to uninstall Dr. Mingw?
"I've moved up to firmware 2.74b
Firmware: 2.74b
Update
I have gotten the ArduPilot to act like my Gumstix Overo is Ground Control Station 3 (gcs3). Therefore, all the attitude and location information is streamed to the Overo.
Problem
The Overo…"
Firmware: 2.74b
Update
I have gotten the ArduPilot to act like my Gumstix Overo is Ground Control Station 3 (gcs3). Therefore, all the attitude and location information is streamed to the Overo.
Problem
The Overo…"
"I've been working on a similiar project. I am connecting a Gumstix Overo to the ArduPilot and streaming GPS coordinates, Altitude, and Attitude information between the devices. I have successful gotten the stream the work (Or so it appears). If you…"
Greetings,Firmware Version: 2.71Attached Files: Modified ArduPlane.pdePremiseI've been working on modifying the ArduPlane's firmware so that it outputs a stream of data describing the plane's location, altitude, and attitude over Serial2…
I am a tad bit confused by the specs on ESC's and Brushless Motors.When an ESC is said to be a 12amp ESC, what does this mean? Is the maximum output amperage to the motor 12amps?What does the motor's "current capacity" mean? For instance, the motor…
"I moved my simulation setup over to a Windows environment. I am getting similar results. Another detail to the puzzle is that the ArduPilot only outputs 0 or 1 for its surface controllers. These are the maximums. In other words, it outputs a maximum…"
Hardware: APM 2.5Firmware: 2.71I am attempting to do a HIL sim with Flight Gear. Currently, when I try to get ArduPilot to fly, the Simulator shows the plane thrown wildly around. The outputs of ArduPilot max themselves out at 1.0. Furthermore, when…
"I grabbed the lastest source using Git Clone from the code.google.com/p/ardupilot-mega/ repo and it gave me firmware v2.68. Is there a reason why 2.71 isn't uploaded to this repo yet?"
"+1"
I'm running ArduPilot 2.70 in HIL mode. I am trying to upload a mission with the following way points:WAYPOINTDO_DIGICAM_CONTROLWAYPOINTRETURN_TO_LAUNCHWhen I try to upload this mission I get the following error:Upload WPs Failed DO_DIGICAM_CONTROL…
"After installing this new firmware, when I tried to upload a flight plan with a DO_DIGICAM_CONTROL, the Mission Planner threw an error back at me saying:
Upload WP's failed. DO_DIGICAM_CONTROL MAV_MISSION_UNSUPPORTED.
How do I allow for…"
Upload WP's failed. DO_DIGICAM_CONTROL MAV_MISSION_UNSUPPORTED.
How do I allow for…"
"I am still having the same problem stated above. In both AUTO and STABILIZE modes my plane descends towards the left side until it hits the ground. When its on the ground before takeoff, the outputs of the autopilot's roll, pitch, and yaw are not…"
