About
Activity Feed
Hello, i have some problems with my APM. When i connected the board with USB and Lipo, just output 5-8 works fine, output 1-4 not, the servos doesnt drive. In Mission Planner, the input and output is okay. Is perhaps the Mux fried? I have tested the…
Hello, i have a problem with the newer APM and the MP. With APM 2.26 works all fine.When i set my modes in the setup menu in MP, i can see that the mode change to Manual at a PWM value of 2100. But in Flight data, there it will not show that it…
Hello,while I test my APM in flightgear, in the Mission Planner sound some different warnings loudly.Where can i check which current warning is which sound?I have Speech off, also the other Speech setting boxes but after restart MP they sounds…
Hello, i have also a problem, but the other threads had nothing help.I try to connect APM 2.26 with mission planner 1.096. First via UAB, that works fine without problems.But with XBee, sometime it connects for a little short time(current mode is…
