Gender
Male
About
Location
Middletown, NJ
About Me:
IT guy interested in R/C and UAVs on quadcopter and airplane platforms
Please tell us a bit about your UAV interest
I have been interested in arduino based projects for a while but had not found a good place to start. Looking forward to exploring the APM 2.0 platform with a DJI frame.
Hometown:
Middletown, NJ
Activity Feed
Sorry, I was googling around and found this: https://www.youtube.com/watch?v=7Nqr4-cbyvIShows there is a new version of the PPM encoder that support native sbus and has a link to the firmware. What I can't figure out is why every were else I look,…
"I found this... Check it out:
https://www.youtube.com/watch?v=7Nqr4-cbyvI
If it works this easy, not confirmed yet, why hasnt the rest of the team actually picked it up and made sbus a part of the ArduPPM encoder yet?"
https://www.youtube.com/watch?v=7Nqr4-cbyvI
If it works this easy, not confirmed yet, why hasnt the rest of the team actually picked it up and made sbus a part of the ArduPPM encoder yet?"
"Can someone tell me what to look for in a flight log to figure out why autotune is not working? I arm the apm2.6 take it to a hove about 20' up and 20' out. Flip Flight mode to alt-hold and then flip the chan 7 switch set to autotune. 1 our of 5…"
"They are the DF13 type connectors on the cables. They come in different pin counts. Here is a link to a 5pin cable... https://store.3drobotics.com/products/df13-5-position-connector-25-... you can google it and find the bare connectors, pins…"
"If I use autotune can I then save the pids, download to stable release and re-enter the new pids?"
"Looking good... just finished my f330 and wanted to step up to a bigger battery, currently running 3s 1800 30c Glaciers. I am adding fatshark predator v2 this week and already have the 900mhz telemetry onboard. What do you think about a 3300 or…"
"Ok so not sure what fixed it but I was able to reflash the apm2.0 with ac3.0.1 and all seems to be fine now. I did redo the live calibration and the accelerometers too. I have not had to tune the pids though I will start with the f330 guide next…"
"I am in need of the same pinout as I do not have the cable for df13 to apm2.0 HELP!!!"
"That's why I'm hoping for a pin out. I don't care if I have to make the cable myself. Not trying to call 3dr for them. Anyone know the pinout"
"No I only received the apm2. 5+ style.. Not sure what you mean by colors match since there is one red and five black.. I need to know how they map to the breakout on the apm2 so I can cut the factory cable and add servo extension connectors to plug…"
Can anyone help me out with this? the included cables do not work on the APM2 and I am unsure of the pinout on the radio side as it appears different than the older pc board radios that do not have the black plastic outer shell. ThanksJosh
http://www.youtube.com/watch?v=qIHSi3wHAXEHi everyone.. I could use some help. I created a video of the issue I am having. I am trying to get an original APM2 board circa april 2012 to work on a DJI F330 with 30a Opto ESCs and 2212 motors.…
"Those radios are not for video although you can get video tx/rx in the same frequency range elsewhere. These radios are for wireless serial communication with the flight controller to send commands or receive flight telemetry data from the flight…"
"Do you want to mix pan tilt with roll pitch or give up roll pitch for pan tilt? I'd suggest the first if you really want to use the right stick as I'm not sure I would be comfortable not having access to main flight controls just in case something…"
