Hello everyone, after a few tests, we finally got an Align T-Rex 600 to fly with the APM in Stabilize Mode. The link below is a video of our test flight. However, things are still far from perfect. What do you guys suggest we further tune in order…

We have configured the APM to work with an Align T-Rex 600. However, during our first few test flights, there seems to be a problem when we're trying to take-off. The hellicopter wobbles after taking-off a few inches from the ground. The APM was set…

We tried using the APM on an Align T-Rex 600 for the first time. However, when increasing the collective to more than 50%, the cyclic goes haywire and we're unable to fly the helicopter. Below are the links to the youtube videos of the test. We also…

We're planning on using an ArduCopter 2.5 on-board an Align T-Rex 600. However, has anyone tested it on the same or similar platform? Is it ok if we may know the parameters that were used for PID tuning? Thank you!

Hello everyone, we recently acquired an APM 2.5. We followed the procedures for connecting the APM to a single rotor helicopter, more specifically an Align T-Rex 600. However, after a few tests, we are unable to connect the APM to MavLink, and when…