Hi there!I'm a professinnal mapper, began 2 years ago with an Ebee from sensefly and now with several multirotors and different cameras configurations.I want to use the maps i produce with Ebee drone /pix4D in a GCS app like mission planner or…
I succeed to use offline map without any problem, but i want now use my own map, made with a mapping plane and Pix4D software. I can upload my map in mapbox (i see it on mapbox site), but i can't see it on the tower app, i always have the one…"
I'm a user of pix4D, creating maps and 3d models. I own an Ebee (sensefly) and 3 mapping multirotors, from small 560 to big octo 800. I need now to use my own map made with an ebee/Pix4D in tower app, to have the benefit of the cm accuracy…"
"Another question about retractable landing gear. When in auto retract/deploy mode, how the pixhawk detect landing? Is that triggered only if landing or RTL mode is switched, or is this something with baro/gps that do the job?
I'm like you, in the dark for setting up my PX4flow.
By testing a lot of things, i finally have a good signal, correlated with Imu signal.
The sonar seems to not be compatible with pixhawk/apmcopter, and i try to solder another one…"
"Congrats and big up to the developpers and tester, as usual, fantastic features and more reliability!! 3.3 works perfectly on my small quad as on my big X8, that is much more stable in fast descent.
I have a few questions about px4flow, and the…"
I'm the proud owner of a cortex with pixhawk, and i had a lot of fun to work with it. I have a problem now that i need to put larger props ( i was flying soft 15", and i want to put tmotor 15 on the top and 16 on the bottom, as carboncore do).…"
Hi all,There is now several month that i try to optimize the tuning of a big octo-quad (carboncore cortex).Carboncore use mn4010 motors and tmotor carbon 15" on the top, 16"on the bottom. This set up is working well with DJI Naza, but i never had a…
I just upload 3.2 in my carboncore cortex, and i wonder if i can activate ekf "just for try" or is it something to tune before use?
Thank you, specially to the dev team that did a really impressive work!"
My problem was that i have a DccEle - DCcduino Mega 2560, a clone of arduino uno, and the drivers are differents. I finally found them on a russian website, and it works perfectly after little adjustments. Thanks for all!!!"