Gender
Male
About
Location
Chonburi
About Me:
Love tech and more money than brains when it comes to this stuff!!!
Please tell us a bit about your UAV interest
Interested in hobby and doing some aerial photo/video around my beach town in Thailand.
Hometown:
Bangsaray
Activity Feed
"First one does not look very robust. Second one, no controller board, third "Tarot T-2D". I have one and am absolutely over the moon on the performance. NO jello!!! Fabulous!! But instructions as supplied are poor. On line documentation is…"
"For tilt function, bypass the Pixhawk/APM all together. Go direct from gimbal board to the channel 6 on spectrum receiver. Make sure you connect ground as well. Then thru mission planner, turn off gimbal stabilization all together."
"Okay, part one answered. Flying in STAB mode due to poor GPS, turn fence enabled off.
But do not understand why it did not go up to 20m RTL height and then start flying to "home". If it had, I could have switched out and back to STAB to save it.…"
But do not understand why it did not go up to 20m RTL height and then start flying to "home". If it had, I could have switched out and back to STAB to save it.…"
I was flying one day in stabilise mode since I could not get a decent GPS lock or HDOP number. Out of the blue, the hex a took off aggressively to the left and crashed some 20 metres away. I was only flying at about 5m high. My hexa has oodles of…
I have a large Hexa and want to make sure that I power it up correctly. I have already fried one APM and I think it may have been an over current through ground issues. My set-up is:3S Battery to power1: APM (radio, GPS.....) thru the Power module…
"Have seen others try to make parts that should be moulded by using 3D printing instead. Be aware, I think you will find the 3D parts fracture quite easily compared to moulded.
"
"
"Better add that to the wiki..... Hahaha"
"Tell me about it. On my last flight, lost half a blade. Vibrations was so severe the aluminium arm snapped and she crashed down. Landing gear destroyed. Camera Gimbal destroyed. Camera destroyed. Rebuild and now it appears one of the ESC's…"
I have had three major crashes that are all related to mechanical failures. 2 times, prop flying off. Addressed that by buying new motors/mounts fixed in place. Now today had a prop snap 30m up. With a quad, it is lights out, big crash coming.…
"My best guess based on log data and visual evidence is that the blade snapped. This caused the motor to run up full. This in turn with the now greatly unbalanced prop caused massive vibration resulting in the aluminium arm snapping in two."
Had a big crash today with my quad from about 25-30m up. Interesting as I was in alt hold when it started to go a bit wobbly and rotate. The she dropped. Was filimg with GoPro at the time and actaully caught footage of what might of happened.…
"I am very much a new person to this craft. But after watching the video, the copter was the most unstable piece of equipment I have seen in any video, full stop. There are many issues here with this build before putting out a safety alert on the…"
"That being said, do I think this is an market niche that is going to grow!! Absolutely!! DO I think the people involved in developing the technology, software, hardware etc. are doing a great job! You bet! But from the public standpoint, of…"
"Guys, I have lived in Asia for 15+ years and run large mutlinational companies. Today in Thailand I can go to IT mall and buy a Iphone5 for 7000 baht. Or I can go to Apple store or registered dealer and pay 20,000 baht. Am I so naive to think they…"
"Thanks for all the feedback. i got the answer after searching around for a few days. I guess if the problem does not involve Zacc, people are not interested in giving guidance....."
I have failsafe setup on my copter so that if you lose radio contact or radio power, it will RTL. Now I was playing around on the bench to day and came across something that I do not understand.If you are in any mode except STABILIZE, when I flip…
