About

Gender

Male


Location

Chualar, CA


About Me:

I started with Blade 400, still have it but never got it in the air for more than a minute. then moved on to the Aerosky 550, RCT800 and T960


Please tell us a bit about your UAV interest

im interested in fpv but still not there


Hometown:

Chualar


Activity Feed

MG replied to James A's discussion Y6 Hot motors and ESCs in Arducopter Y6 Owners
"It's been a while since I posted a question about the Sunnysky X4108S and Y6 well I tried it but I had trouble getting it stable using the pixhawk so I got longer carbon fiber arms and switched the controller to the naza m, but I'm ready to switch…"
Jul 12, 2015
MG replied to Craig P.'s discussion Help!!! Need to know how to use maps offline in droidplanner 2, without a windows pc.
Jan 25, 2015
MG replied to James A's discussion Y6 Hot motors and ESCs in Arducopter Y6 Owners
"Well since you're using I used CF 1238 on top and APC Slow Fly 1347 on the bottom motors im going go ahead and try it. The SunnySky test data shows it ok with a 6s. Well thanks for the help"
Nov 28, 2014
MG replied to James A's discussion Y6 Hot motors and ESCs in Arducopter Y6 Owners
"Hy, I wanted to ask since you're all familiar with the 3dr y6, I currently have 6 Sunnysky X4108S KV380 1238 propellers 40a ESC and a 6S battery . I also have 6 Tarot 2814 700KV with plenty of 4s batteries but i would prefer using my Sunnysky…"
Nov 26, 2014
MG replied to Rich B's discussion Newb: Pixhawk doesn't seem to work with ArduCopter 3.1.3, but seems ok with ArduPlane 3.0.2
"I also had problems with the hex firmware but the Y6 works fine with my PixHawk"
Jul 5, 2014
MG replied to Rich B's discussion Newb: Pixhawk doesn't seem to work with ArduCopter 3.1.3, but seems ok with ArduPlane 3.0.2
"I'm not trying to promote!  I'm just trying to help.  like I said I'm new to Pixhawk and I was stuck for 8days trying to connect after installing firmware to arducopter in mission planner 1.3.1.  if you would look at my first two videos, if that's…"
May 19, 2014
MG replied to Rich B's discussion Newb: Pixhawk doesn't seem to work with ArduCopter 3.1.3, but seems ok with ArduPlane 3.0.2
May 18, 2014
MG replied to Rich B's discussion Newb: Pixhawk doesn't seem to work with ArduCopter 3.1.3, but seems ok with ArduPlane 3.0.2
"wired I disconnected the usb adapter and used the regular USB and its still working.  I have no idea what made the jump other than the usb adapter"
May 17, 2014
MG replied to Rich B's discussion Newb: Pixhawk doesn't seem to work with ArduCopter 3.1.3, but seems ok with ArduPlane 3.0.2
"I did say keep you posted, ain't it a bit too quick to call it spam and have it removed?  Also I only purchased the pixhawk with the GPS and compass from 3DR


https://www.youtube.com/watch?v=c35dDFr4YvA


https://www.youtube.com/watch?v=yeJYVkK0cuI…"
May 17, 2014
MG replied to Rich B's discussion Newb: Pixhawk doesn't seem to work with ArduCopter 3.1.3, but seems ok with ArduPlane 3.0.2
"I had the same problem and hopefully it stays that way because I just connected the Pixhawk RGB USB Module External LED that i bought on ebay  and its working, ill keep you posted"
May 17, 2014