Gender
Male
About
Location
Schweiz
About Me:
Technical Enthusiast from Switzerland
Please tell us a bit about your UAV interest
Had a first not working DJI Vision+, got a second one which didn't work either. Now, it's time to build my own. :)
Hometown:
Wangen bei Olten
Activity Feed
"I use this dual UBEC Powerboard an my Hex:
http://hobbyking.com/hobbyking/store/__55556__Quanum_Power_Distribu...
and this smaller one on my race quad:
http://de.aliexpress.com/item/Dual-UBEC-Distribution-Board-VI-Senso...
I'm pretty happy with it…"
http://hobbyking.com/hobbyking/store/__55556__Quanum_Power_Distribu...
and this smaller one on my race quad:
http://de.aliexpress.com/item/Dual-UBEC-Distribution-Board-VI-Senso...
I'm pretty happy with it…"
HiI'm looking for a alternative to my actual Tarot T-2D gimbal. I use it for a while now and could never get it working perfectly. I tried different settings but none gave me a solid performance. Today it was a bit windy and as you see, my gimbal…
"At least my Pixhawk worked fine with this adapter. I didn't try to remove it while it's operating. The lock mechanism looks very solid but of course, its one cable more who can break..."
HiAs I stared with my Tarot T-2D gimbal the fact that I had to unmount the whole camera to access my movies and pictures annoyed me because the camera sits very tight and it doesn't feel very good how much force it needs to get it out.I found a very…
"green: altitude
blue: throttle I set on my radio
purple: throttle Pixhawk sent to the motors"
blue: throttle I set on my radio
purple: throttle Pixhawk sent to the motors"
Hi thereI've a very strange problem with my pixhawk / arducopter 3.1.5 controlled copter. I've a very good response of the copter in stab mode. Fast on every axis but in loiter, descending is nearly impossible. I have a good stable loiter with…
