Gender
Male
About
Please tell us a bit about your UAV interest
Hello everybody, using UAV is the main aspect of my job, I do have a good knowledge for many applications such as topography, precison farming, territorial marketing ecc...right now I'm envolved in a personal project trying to build up my own drone, probably this is the main reason I'm here trying to get good ideas for my own purpose.
Hometown:
Florence
Activity Feed
Hello everybody,I'm trying to switch on/off some leds using switch relay.I need to turn a relay on or off based on the PWM value.5v are provided to Aux ports using an external BEC which also performs the function of secondary power supply.I've read…
hello, lately I have experienced this problem, all happened after installing a 5v supply ubec on pixhawk servo port, I have also installed a zener diode 5.6 V 5W and a 1000 μF capacitor to smooth the signal. I have checked my log to see if I can…
"Hi Carlos,
at last I succeed on make it working, basically I was trying to invoke AT indoor and this gets rejected by pixhawk, you need to go outdoor and try, in this case you won't have problem.
regards
Carlos Calvetti said:
Hello,
Have you fixed…"
at last I succeed on make it working, basically I was trying to invoke AT indoor and this gets rejected by pixhawk, you need to go outdoor and try, in this case you won't have problem.
regards
Carlos Calvetti said:
Hello,
Have you fixed…"
Hello everybody,I was wondering if it is possible to configure servo rail for back up power, I have read this sentence on this wiki page and the real matter is that I can't really figure out how can I configure this feature.To be honest the word…
Hello everybody,I was wondering if it is possible to configure servo rail for back up power, I have read this sentence on this wiki page and the real matter is that I can't really figure out how can I configure this feature.To be honest the word…
hello,is there anyone who can tell simpleBGC from storm32BGC? despite the big difference on price they look pretty much the same to me...am I missing something?link…
is there a way to get the current drawn by a gimbal motor in full operation?motor specs:Poles: 12N14P KV(RPM/V): 210 Resistance: 10.4omh Weight: 35g Wire: 0.19mm Torque: 240g camera weight: 135gI was wondering this because my gimbal controller can…
"Gus, Lin, if you set shot interval on fast instead of burst the camera will shot just once."
Hello all,I can not calibrate my internal compass anymore. No problem for the external but the internal doesn't show any sign of life.As you can see in the image below the second compass during calibration doesn't move. Do you have any advice on…
"Forrest thanks for your help, what your table says reassures me, even though I have already flown a lot with my exa.
Anyway I'd like to understand better what you have listed on your table, expecially:
Battery o PDB
1) How do you get Ship Wgt Gain…"
Anyway I'd like to understand better what you have listed on your table, expecially:
Battery o PDB
1) How do you get Ship Wgt Gain…"
"Thanks Paul,
would you share the article you read.
Best regards.
Marco
Paul Atherton said:
15 amps is cited as the limit for household wiring applications, but this is due to the long cable runs in house wiring. In drones we are talking very…"
would you share the article you read.
Best regards.
Marco
Paul Atherton said:
15 amps is cited as the limit for household wiring applications, but this is due to the long cable runs in house wiring. In drones we are talking very…"
"Hi Forrest,
as far as concern my drone:
- at hover it needs an average of 22 amps
- the 14 awg it is very short (1 inch) and it is used to connect the power module to the PDB, PM has 13 AWG.
- I have also 18 AWG that run from PDB to ESC
- it is an…"
as far as concern my drone:
- at hover it needs an average of 22 amps
- the 14 awg it is very short (1 inch) and it is used to connect the power module to the PDB, PM has 13 AWG.
- I have also 18 AWG that run from PDB to ESC
- it is an…"
Hello,I was just wondering, how much current can a 14 AWG wire handle? can anyone explain and give further detais on this matter? Marco
"Buy a Mavic DJI and you are just fine. "
"Hi Clifton,
yes indeed you are right. may it be considered a power module backup, just in case I am using it. Do you agree?
Should I use a zener diode to eliminate sudden peak voltage?
Which port should I use for UBEC and Zener?
regards.…"
yes indeed you are right. may it be considered a power module backup, just in case I am using it. Do you agree?
Should I use a zener diode to eliminate sudden peak voltage?
Which port should I use for UBEC and Zener?
regards.…"
