About

Gender

Male


About Me:

I'm a PC Programmer and also work on a IT heldesk


Please tell us a bit about your UAV interest

I learned to fly with DJI and i'm still flying with them But now i build myself a 680 quadcopter and a 750 hexacopter. The quadcopter with a APM 2.6 and on teh hexacopter i would like to install a APM 2.5


Hometown:

Wetteren


Activity Feed

Marnix Verschraegen commented on hector hind's blog post Micro APM Hardware "Just make it smaller.."
"Does someone nows how to reflash the mega 2560 bootloader on the HK Micro APM 2.7.2
i found the problem on my board, but my first board is still recognized as mega 2560 but the mission planner does not recognizes it anymore.
So i thouth perhaps…"
Apr 21, 2015
Marnix Verschraegen commented on hector hind's blog post Micro APM Hardware "Just make it smaller.."
"I have a big problem i ordered 2 of these with HK.
after installation and some modification to use a standard APM power module. connected the board to my GPS, ESCs and OrangeRX 9chan RX. Well it seems that the RX only works when i give poer from a…"
Apr 21, 2015
Marnix Verschraegen replied to Casey's discussion ArduPilot Compass
"I have the same problem on my APM 2.5 i cut the trace but still it seems that the compas still works when i move the APM i see my yaw moving in flight data. But when i try to do a compas calibration i have no data comming in.

I also have a second…"
Apr 11, 2015
Marnix Verschraegen replied to Rob's discussion HJ-Y3 Tricopter Build
"Have you already programmed your TGY-i6 TX ?
if yes we would like to have the info how you did it.
thx
/\/\ax2206"
Apr 11, 2015
Marnix Verschraegen replied to Claus Bartetzko's discussion FS-i6 ChannelMix
"oeps what we need to confugure is the 6 fligh modes with the 3 selction switch and a 2 selection switch.
But we also need also a 2 selection switch so we can use auto tune
thx
/\/\ax2206"
Apr 11, 2015
Marnix Verschraegen replied to Claus Bartetzko's discussion FS-i6 ChannelMix
"I have the same problem...
Need help here
thx
/\/\ax2206"
Apr 11, 2015